Operator's Guide
Table Of Contents
- _
- _
- Table of Contents
- Charging and installing batteries
- Attaching a ground wire to the radio
- Inserting a 6110-MP into a backpack
- Selecting and connecting your antenna
- Testing your radio before deployment
- Front panel and screen overview
- Handsets
- Speaker and mute
- Discreet mode and zeroise
- Secure communications
- Entering and editing text
- Scanning, channel and scratch modes
- HF networks
- Call types
- Answering and ending a call
- Making a 2G or 3G ALE call
- Making a Selcall call
- Stations
- Viewing GPS Information
- Update the radio profile with a USB thumb drive
- Troubleshooting
- Definitions
- Menu Navigation
- _
Select mute type
Mute
type
Icon Description
Voice Mute is opened when speech is detected on a channel in all supported
modes and when receiving a call addressed to the radio.
Selective Mute is opened when a call addressed to you is detected
Digital Mute is opened when digital voice is detected
To select the next mute type, from the channel screen:
1. Press the key.
Opening and closing mute
The mute can be opened (sound on) and closed (sound off) from the Operational screen
Note: By default, mute is automatically closed after 5 seconds of inactivity.
Note: Opening and closing mute will affect all connected control points and H-250
audio accessories.
1. Press (Mute) to toggle mute open/closed.
Speaker and mute
Page 26 Sentry-H 6110-MP Operator Guide