Operator's Guide
Table Of Contents
- _
- _
- Table of Contents
- Charging and installing batteries
- Attaching a ground wire to the radio
- Inserting a 6110-MP into a backpack
- Selecting and connecting your antenna
- Testing your radio before deployment
- Front panel and screen overview
- Handsets
- Speaker and mute
- Discreet mode and zeroise
- Secure communications
- Entering and editing text
- Scanning, channel and scratch modes
- HF networks
- Call types
- Answering and ending a call
- Making a 2G or 3G ALE call
- Making a Selcall call
- Stations
- Viewing GPS Information
- Update the radio profile with a USB thumb drive
- Troubleshooting
- Definitions
- Menu Navigation
- _
Charging and installing batteries
Check batteries
Before any deployment, it is vital to ensure that your batteries are fully charged and that you have
a sufficient number of batteries for your mission.
Compatible batteries
The 6110-MP is recommended for use with the following batteries available from Codan.
Codan Part Number Battery Battery Chemistry Rechargeable Capacity
65-72015 BB-390B/U Nickel Metal Hydride Yes 9.8 amp hours
65-72013 BB2590 Lithium-ion Yes 17.4 amp hours
65-72014 BB2590 Lithium-ion Yes 20 amp hours
65-71005 BA-3590/U Alkaline No 15 amp hours
Field charging batteries
The Codan supplied BB-390B/U and BB2590 batteries are compatible with the MIL-STD Battery
Charger Kit (Codan Part Number: 15-00585-00X). The MIL-STD Battery Charger Kit can be
powered by several different AC or DC power sources, including a Solar Panel Power Supply
(Codan Part Number: 15-00537-00X).
Charging and installing batteries
Sentry-H 6110-MP Operator Guide Page 3