Operator's Guide
Table Of Contents
- _
- _
- Table of Contents
- Charging and installing batteries
- Attaching a ground wire to the radio
- Inserting a 6110-MP into a backpack
- Selecting and connecting your antenna
- Testing your radio before deployment
- Front panel and screen overview
- Handsets
- Speaker and mute
- Discreet mode and zeroise
- Secure communications
- Entering and editing text
- Scanning, channel and scratch modes
- HF networks
- Call types
- Answering and ending a call
- Making a 2G or 3G ALE call
- Making a Selcall call
- Stations
- Viewing GPS Information
- Update the radio profile with a USB thumb drive
- Troubleshooting
- Definitions
- Menu Navigation
- _
Update the radio profile with a
USB thumb drive
CAUTION: An unconfigured radio is not capable of making calls.
The 6110-MP can be configured in the field using data stored on a USB drive supplied by your
Radio Network Administrator. The drive can be pre-loaded with a radio configuration profile, a set
of encryption keys and software updates.
To update or configure the radio:
1. Connect a USB memory stick to the J9 USB port using a USB Memory Stick Adaptor
cable (Codan Part Number: 08-07436-001).
2. Select Program Profile.
3. Navigate to and select the profile you want to program onto the radio.
CAUTION: Continuing with this process will overwrite the current profile
stored on the radio. This action is not reversible. Select (No) to abort
this action if you need to back up the existing radio profile first.
4. Select (Yes) when asked if you want to Program the profile from file.
5. Enter the Admin PIN if prompted.
The profile is programmed into the radio.
Update the radio profile with a USB thumb drive
Page 54 Sentry-H 6110-MP Operator Guide