Operator's Guide
Table Of Contents
- _
- _
- Table of Contents
- Charging and installing batteries
- Attaching a ground wire to the radio
- Inserting a 6110-MP into a backpack
- Selecting and connecting your antenna
- Testing your radio before deployment
- Front panel and screen overview
- Handsets
- Speaker and mute
- Discreet mode and zeroise
- Secure communications
- Entering and editing text
- Scanning, channel and scratch modes
- HF networks
- Call types
- Answering and ending a call
- Making a 2G or 3G ALE call
- Making a Selcall call
- Stations
- Viewing GPS Information
- Update the radio profile with a USB thumb drive
- Troubleshooting
- Definitions
- Menu Navigation
- _
Inserting your battery into the radio
The battery is connected to the (J7) Connector located on the bottom of the radio and housed in a
latching battery compartment. The image below shows the placement and alignment of the
battery, battery compartment and radio.
CAUTION: To prevent damaging the 6110-MP and the battery, you must ensure that
the battery is correctly aligned to the battery connector (J7) on the 6110-MP before
attaching the latching battery compartment to the radio.
latch
battery
Sentry®-H
6110-MP
latching battery
compartment
battery connector (J7)
Charging and installing batteries
Page 4 Sentry-H 6110-MP Operator Guide