User Manual

ManualsBrandsCodatex ManualsModulesAccessories for RFID reader / power supply, 0...45 °C, 12 V

U S E R G U I D E

Version 01/02

Powermodul 2002 POW

for RF Reader 1plus, 2plus and 4plus

Important! Read by all means!

To maintain the perfect shipping conditions and to ensure safe operation please observe the instructions

in this Operation Manual. Damages caused by non-observance of these instructions will invalidate any

guarantee. We further cannot take liability for any consequential damages.

Summary of content (5 pages)

PAGE 1
USER GUIDE Version 01/02 Powermodul 2002 POW for RF Reader 1plus, 2plus and 4plus Important! Read by all means! To maintain the perfect shipping conditions and to ensure safe operation please observe the instructions in this Operation Manual. Damages caused by non-observance of these instructions will invalidate any guarantee. We further cannot take liability for any consequential damages.
PAGE 2
Table of Contents Page 2 1. Introduction............................................................................................................................................ 3 2. Intended Use.......................................................................................................................................... 3 3. Safety Instructions .............................................................................................................................. 3 4.
PAGE 3
1. Introduction Dear Customer, We want to thank you for purchasing this Power module With this unit you have acquired a product built to the latest state of engineering. Its operation is simple and easily understood. Nevertheless please read this Operation Manual carefully for optimum utilization of all of its features. 2. Intended Use The intended use of this Power module 2002 POW is to supply power to the RF reader modules 1plus, 2plus and 4plus according to the technical notes in this user guide.
PAGE 4
. Device Description The Power module 2002 POW is designed as plug-in module for the RF reader modules 1plus, 2plus and 4plus. The terminal layout for the pins 1 to 8 is congruent to the layout of the reader modules and can be connected with pin connectors (2,54mm grid). The pins 10 to 19 are designed for 3,5 mm screw connectors. Also available on the power module are a push button (connected to pin 2 of the reader modules) and a relay (connected to pin 3 of the reader modules open collector output).
PAGE 5
7. Operation The power module will be put into operation by providing the supply voltage to it. It provides the 5 V supply voltage to the RF reader modules and has all necessary pins for operating the RF reader modules available on its pins 10 to 19. 8. Care, Maintenance and Disposal Besides providing the specified voltage and its intended use as a power module for the RF reader modules 1plus, 2plus and 4plus the power module does not require any special care or maintenance.