System information

ATS 2000/3000/4000/4500 Programming manual 119
Remote Device: 1-DGP 2-RAS
Device:
28. TO REMOTE DEVICES
Use this option to access the programming menus for 1-Door RAS’s (e.g. ATS1270) or 4-
Door/4-Lift DGP’s (e.g. ATS1250/1260). These remote devices have additional menu’s
that can be accessed via the control panel using this menu.
The remote device has to be:
• Connected to the ATS System Databus
• Addressed as a RAS or DGP with on-board DIP switches
• Programmed to be polled in the menu RAS database (page 42, RAS’s only) or DGP
database (page 49, DGP’s only)
• Programmed with the correct type (DGP’s only) in menu DGP database (page 49).
28.1. Select the device type
To establish a connection to the remote device, select the device type first. The type is
either a RAS (e.g. ATS1270, 1-Door RAS) or a DGP (e.g. ATS1250/1260, 4-Door/4-Lift
DGP).
28.2. Select the device to program
Select the device number to program. The number is the same number as set using the
DIP switches on the device.
 For further information on programming the remote device, see the programming
guide for the device.