User`s manual

20 20
AC Adapter/Charger
This accessory (Universal AC Adapter 340-2022) becomes the external power source when
plugged directly into the Curlin Medical pump (see Figure 1.2 for external power port location
on the bottom of the pump). The AC Adapter can also be used to recharge the portable battery
pack by plugging the connecting cable into the recharging port on the battery pack (see Figure
1.12). The two-pin connector on the end of the cable plugs into the receptacles correctly by
aligning the red dots on each.
Note: Pause the pump and then turn it off before connecting the AC Adapter. Note, also that
the connector is keyed with a “notch” at this red-dot location to guide alignment. To
remove, pull back on the locking sleeve to unlock and then pull gently to remove the
connector from the battery pack or pump’s port.
Figure 1.13 Universal AC Adapter
Two-Pin Adapter plugs into port on bottom of the pump for AC power or can be used
to recharge the battery pack by plugging into the recharging port on the battery pack
(see Figure 1.12). Note the connector notched keying and red dot alignment
. To
remove, pull back on the locking sleeve.
Locking Sleeve