User`s manual

Note: If a lock setting of 1, 2 or 3 is selected, an access code will be requested. If you wish to

give a clinician dose at this time, change OFF to ON and press YES key. Enter the

amount of clinician dose to be delivered. Press YES to accept the clinician dose menu.

The Clinician Dose will begin when the options screen is accepted and the pump is

running. The following Run Screen will appear until it is completed:

Clinician Dose Run Screen

The graphic bar now depicts the clinician dose in progress and when this dose is complete,

reverts back to reflecting the container in progress. In CMS-enabled pumps, the graphic

bar will toggle with Line Pressure (“L Press”) which displays the current patient side

(downstream) pressure in the administration set in millimeter of mercury (mmHg)

units.

The Volume Infused will toggle with Dose Infused if mg or mcg are the selected unit.

Remaining dose time will toggle with remaining dose volume to infuse.

When the clinician dose is complete, the pump will beep, return to the

previous running rate, and resume the PCA therapy. The lockout

time for bolus dosing will restart at the end of the clinician dose to

prevent a bolus from being delivered too quickly after a clinician dose.

Once the clinician dose is given, the clinician-dose field returns to its default of “0,” and any

subsequent clinician doses will need to be reentered.

3 SHFT TOT (Shift Totals): This feature allows the clinician to track the infusion for a selected

period of time, such as an 8 or 12-hour shift. To access Shift Totals, press the

“NO/CHANGE” key to change OFF to ON and then press “YES/ENTER”. The

following screens will appear alternately:

Shift Totals Screens

a. Cleared/ELAPSED: This field displays the date and time the shift total was last cleared.

It toggles with the amount of time elapsed since that clearing.

b. Vol INF/Amt INF (Volume/Amount Infused): This field displays the volume (ml) and

amount (mg or mcg) infused since the shift total was cleared.

c. BOLUS/Clin DOSE (Clinician Dose): This field displays the number of clinician doses

given since the total was cleared. It toggles with the number of patient activated boluses

received of those requested.

IMPORTANT

INFORMATION