Programming instructions

2
1. Lock Switch (87a) (BLU/BLK) 1. Parking Light Output (WHITE) 1. HVAC2 Input (+) (BLUE)
2. Unused 2. Lock Motor Output (BLUE) 2. Battery (+12v) (RED)
3. Unlock Switch (87a)(GRN/BLK) 3. Dome Light Output (BLK/WHT) 3. Ignition 2 Output (+) (PK/WHT)
4. Unused) 4. Battery (+12v) (RED) 4. HVAC1 Output (+) (ORG)
5. Unused 5. Ground (BLACK) 5. HVAC2 OutpuT(+) (ORG/WHT)
6. Unused 6. Starter Key (+) (VIOLET/RED) 6. Unused
7. Unused 7. Ignition 1 Input/Output (+) (PINK) 7. Brake Input(+) (BROWN)
8. U nused 8. Starter Motor (+) (VIOLET) 8. Neutral Safety (BLK/WHT)
9. Trunk Switch (87a) (TAN/RED) 9. Unused 9. Tach In (VIOLET/WHT)
10. Unused 10. Door Trig 10k Pull-up (YELLOW/WHT) 10. Active Out (-) (BLU/BLK)
11. AUX 2 (-) 500ma (BLU/WHT) 11. External Start Trigger (WHT/BLU)
12. Unused 12. Unused
13. Unused 13. Trunk Motor Output (TA N )
14. Armed Output (-) (ORANGE) 14. Unlock Motor Output (GREEN)
15. Unused 15. Unused
16. Unused 16. Horn/Siren Output (BLACK)
17. Disarm/Override Button (Ground) (PLUG IN)
18. Disarm/Override Button Input (PLUG IN)
19. Hood Pin Input (GRAY)
20. Door Trigger Input (GRN/VT)
21. Factory Alarm Disarm (-) (BRN/BLK)
22. LED 2 (Red) (PLUG IN)
23. LED 1 (Black) (PLUG IN)
24. Second Door Unlock (-) 500ma (BLU/GRN)
System Layout
System Layout CA-630
TM
A = Advanced Harness
B = Basic Harness
C = Car Start Harness
Note: The wire connection sections will identify each wire with a number
(pin cavity) and a letter (harness), i.e.: 20/B = Wire 20, B (Basic)
Harness.
PATS/VATS HARNESS
01112131 415161314151617181 91021222324278 901
123456789123456789 011121123456
IMPORTANT!!!
The module MUST be programmed before it will operate.
Refer to the programming instructions on pages 15-18.
FOR MODULE FUSE SIZE AND POLARITY
LOCATIONS, REFER TO CHART ON PAGE 17.
View from wire end:
Advanced Harness Basic Harness Car Start Harness
1234
CA 630 install revB 8-04.pmd 8/23/2004, 9:22 AM2