Installation guide

10
6 Pin
Output
Harness
1
BROWN/BLACK HORN
OUTPUT (
- )
Locate the vehicle's horn wire.
Verification:
This wire will
register at positive voltage and register
ground when the horn switch is pressed.
Connect the BROWN/BLACK wire to the vehicle's horn wire. This is a
low current
output, 200mA.
2
BLUE/BLACK
START STATUS
I
ACTIVE
OUTPUT
(-)
This wire provides a ground output when the remote start function is activated
and remains
until 4 seconds after the remote start is shutdown.
If this wire
will
be used for multiple
application's a
1
amp diode is required in-line with the stripe
facing the control module.
3
VIOLET/BLACK
AUX 1
This wire provides a
( - ) 200mA output capable of driving relays. For Control of
optional accessories (i.e. Power Window/Sunroof, etc.).
To
activate refer to the transmitter button configuration chart. Please refer to the
selectable options for timing.
4
RED
!WHITE
TRUNK
RELEASE
OUTPUT
(-)
Locate the vehicle's trunk release wire at the trunk release switch.
Verification: This wire will
register either positive voltage or ground when
the trunk release is activated.
This is a
low current 200mA output and
in
configurable
in
option programming.
ca6553/6553sst
rev
A