Installation guide

12
3
PURPLE
DOOR TRIGGER INPUT
(
+ )
Locate the
vehicle's dome
light
or
door pin switch wire.
Verification:
This wire
will register positive
voltage (POS)
when the door is
opened and the interior light is on. This wire
will
register ground or
"0" Volts when the door is
closed and the
interior light
is
off.
Connect the PURPLE wire to the
vehicle's
positive door input wire(s).
NOTE:
Certain
vehicles
may require multiple
connections. Refer to
vehicle
application
guide.
4
WHITE/BLUE
EXTERNALSTARTINPUT(-)
This wire
will
activate the Remote Start function when a GROUND
pulse
is
applied
to it
from
an
external device.
5
GRAY
HOOD PIN INPUT (
- )
Install
a Hood Pin Switch and connect to the GRAY wire. This connection is
required for Remote Start.
Verification:
This wire when connected
will
register ground when the
vehicle's
hood is opened.
Connect the GRAY wire to the hood pin.
NOTE:
Be sure to
loom
the wire, and
seal the grommet.
6
BLACK/WHITE
NEUTRALSAFETYINPUT(-)
Locate the
vehicle's neutral safety circuit.
Verification:
This wire registers ( - )
voltage
when the
vehicle's
gear
selector is in park or
neutral.
Connect the
BLACK/WHITE neutral
safety input wire to the
neutral
safety wire of
the
vehicle
or an
optional toggle
switch. The remote start feature
will not operate
unless
this input is supplied
with a ground source.
ca6553/6553sst
rev
A