Installation guide

Adjusting the
Shock Sensor
1.
Increase
sensitivity by turning the adjustment
dial
clockwise.
2.
Decrease sensitivity by turning the adjustment dial
counter clockwise.
Testing the Shock Sensor
Arm the system and wait 6 seconds for the zone to stabilize, then firmly strike
the vehicles bumper.
Chirp
Delete - User Accessible
System
ARM/DISARM
chirps can be toggled
ON
or
OFF
without entering the
programming feature banks.
1.
Turn the ignition
ON
then
OFF.
2.
Press and release the valet/programming button 3 times. The system
will
respond with 1 chirp for
ON
or 2 chirps for
OFF.
Dome Light Delay
I
Theater Dimming
The system can be programed to delay arming after the
lock button is pressed
(60
second max) for vehicles
with a dome light delay or theater dimming feature. Once
programed the system
will
'learn' the timing of the dome light delay and
add 2
seconds before arming.
1.
Close all
doors with ignition off.
2.
Using the transmitter press
LOCK,
UNLOCK,
LOCK
,UNLOCK,
LOCK,
UNLOCK, LOCK.
The LED
will
light solid to indicate the system has
entered
DOME DELAY LEARN
MODE.
3.
Immediately OPEN then
CLOSE
the door
WITHOUT disarming the
system. The system
will
then monitor the door trigger wire. Once the
dome light turns off, the system
will
then add 2 seconds and then exit
the learning mode.
4.
The LED will begin to
flash
indicating the system has exited the
learning mode and is now armed.
2 6 ca6553/6553sst
rev
A