Installation guide

28
8 - Ground While Armed
I
Orange Output:
Controls the output of the orange
wire. This wire
will
either supply a ( - ) output when armed
OR
disarmed.
9-
OBI
Port
Protocol:
Determines the protocol type
in
which the DBI
port uses to
interface with external modules.
DBI
Protocol
ADS
Protocol
10
- Arm/Disarm
Chirp
I
Parking
Light
Pattern:
Determines the number of
chirps and parking light flashes when the system
is
armed/disarmed.
Standard - 2 chirps/light flashes with arm, 1 chirp/light flash with disarm.
Inverted
-
1 chirp/light flash with arm, 2 chirps/light flashes with disarm.
Feature Bank 3 -
Output
Control
1 - Extended
Lock
Pulse:
Controls the timing of the BLUE and GREEN lock
output wires.
1
Second-
Single
1 second lock pulse, single 1 second unlock pulse.
3.5
Seconds-
Single
3.5 second lock pulse, single 3.5 second unlock pulse.
1
Second
Lock, Double Pulse Unlock -
Single 1 second
lock
pulse, double 1
second unlock pulse.
30 Second
Lock, Double Pulse
Unlock-
Single 30
second lock pulse, double
1 second unlock pulse.
Double Pulse Lock, 1
Second
Unlock-
Double 1 second lock pulse, single 1
second unlock pulse.
2 - Factory Disarm:
Controls the timing of the
LT.
GREEN/BLACK factory disarm
wire
on
the 6 pin output harness only and does not change the output of the
factory disarm wire
on
the 4 pin alternate output harness.
Factory Disarm -
Single 1 second pulse with unlock and remote start
activation.
2nd
Unlock-
Same
output as unlock with 2nd press of unlock.
Factory Disarm
I Start
Status-
Single 1 second pulse with unlock and
continuous ( - ) output during the remote start cycle.
ca6553/6553sst
rev
A