Installation guide
Feature Bank 
5-4 
Pin Alternate 
Output 
Control 
1 - Lt 
Green/Black 
Output: 
Controls 
the 
LT 
GREEN/BLACK output activation 
type and timing. 
Pulse 
before Start 
I 
During  Unlock 
-
1 second 
pulse when  remote start is 
activated. Also 
a  1 second  pulse 
when 
unlock 
is pressed. 
Ground While 
Running - Continuous output for the entire remote start 
sequence 
until 
after the  vehicle 
shuts  down. 
Ignition-
Output becomes active with the same timing as the ignition output 
and does not drop out during crank. 
Accessory - Output  becomes  active  with  the  same  timing  as  the  accessory 
output,  drops out during crank. 
Pulse 
During 
Crank-
Output becomes active with the same timing as the 
starter output  wire,  during  crank only. 
2 
-
Lt 
Blue Output 
: 
Controls 
the 
LT 
BLUE output activation type and timing. 
Pulse After 
Start 
I 
During 
Lock-
1 second 
pulse after the  remote start 
sequence and  has confirmed the 
vehicle 
is  running. 
Also  a 
1 second 
pulse 
when 
unlock 
is  pressed. 
Ground 
While 
Running - Continuous output for the entire remote start 
sequence  until 
after the  vehicle 
shuts  down. 
Ignition-
Output becomes active with the same timing as the ignition output 
and  does not drop 
out during crank. 
Accessory  - Output becomes  active  with  the  same  timing  as  the  accessory 
output,  drops out during crank. 
Pulse 
During 
Crank-
Output becomes active with the same timing as the 
starter output wire, during  crank 
only. 
3-
Green/White 
Output: 
Controls 
the GREEN/WHITE 
output activation type and 
timing. 
Pulse 
After Shutdown  - 1 second  pulse  after the  remote  start  has 
shutdown. 
Ground While 
Running - Continuous output for the entire remote start 
sequence  until  after the  vehicle  shuts  down. 
Ignition- Output becomes active with the same timing as the ignition output 
and does not drop out during crank. 
Accessory - Output becomes  active  with  the  same  timing  as  the  accessory 
output,  drops out during crank. 
Pulse During 
Crank-
Output becomes active with the same timing as the 
starter output wire, during  crank only. 
2012 
Audiovox Electronics Corporation. 
All 
rights reserved. 
33 










