Installation guide

4
BE.FORE YOU BEGIN
FOR AUTOMATIC TRANSMISSION VEHICLES ONLY.
•
. . . .
PROFESSIONAL INSTALLATION
STRONGLY RECOMMENDED
Roll down window to avoid locking keys in vehicle
during installation
Avoid mounting components
or routing wires near
hot surfaces
Avoid mounting components
or routing wires near
moving parts
Tape
or loom wires under hood for protection and
appearance
Use a Digital Multi Meter for testing and verifying
circuits. DO
NOT USE A TEST LIGHT, OR
"COMPUTER SAFE PROBE" as these can set off air
bags
or damage vehicle computers.
Technical Support {800) 421-3209
or go to
http://techservices.codesystems.com
ca6553/6553sst rev A