Installation guide

132012 Audiovox Electronics Corporation. All rights reserved.
Button Lock
Press and release
then press hold the for 2 seconds to toggle the button lock
on or off. When the button lock is active, the remote control will beep/vibrate 2
times when a button is pressed indicating it is locked.
Illumination
Press and release
2 times then press and hold for 2 seconds to toggle
illumination on or off. When on, the display will illuminate when it receives or
sends a command.
2 Car Mode
To control a second security system enter 2 car mode by pressing
then press
and together for 3 seconds. When the icon appears on the transmitter’s LCD
screen it will control the second security system. Use the same method to exit 2
car mode and resume control of the original vehicle’s security system.
NOTE: A second security system must be installed and the LCD transmitter must be
learned to it before this feature will operate the additional system.
Parking Meter Countdown
The parking meter countdown timer has 6 preset times, to access the preset times
and begin countdown press and release
then press and hold for 2 seconds,
each additional press of
will increase the countdown time.
Adjusting the Clock and Timer Settings
The clock, alarm clock and programmable countdown timer are accessed through
the Function Menu. Press and hold
for 3 seconds to access the function menu,
once you have accessed the feature menu press and release
to scroll through
each feature and follow the steps below to adjust the settings for each. Press and
hold
for 2 seconds to exit the menu.
Clock Hour Press
to increase or to decrease
Clock Minute Press
to increase or to decrease
Alarm Clock Hour Press
to increase or to decrease
Alarm Clock Minute Press
to increase or to decrease
Alarm Clock ON / OFF Press
to turn ON or to turn OFF
Countdown Timer Hour Press
to increase or to decrease
Countdown Timer Minute Press
to increase or to decrease
Countdown Timer ON / OFF Press
to turn ON or to turn OFF