Installation guide
1 Way 4
Button
Remote
Control-
Model CAT4
The batteries inside each remote control should last approximately 1 year under normal
use. When the batteries become weak you will notice the remote control range (the
distance from the vehicle the remote control will work) deteriorate and the small LED
on
the remote control will dim.
To
replace the remote control batteries:
1.
Using a coin, disassemble the halves
of
the remote
control.
2.
Remove the old battery, observing
the+/-
symbols
on
the
batteries and replace with a new battery.
3.
Reassemble the halves
of
the remote control
4.
Test operation
of
the remote control.
2 Way
LCD
Remote
Control-
Model CATLCD
The AAA battery inside the 2-way LCD remote control should last approximately 6
months under normal use. When the battery becomes weak you will notice the remote
control range (the distance from the vehicle the remote control will work) deteriorate and
the BATTERY icon
on
the LCD remote control will show 1 bar or less.
1.
Gently slide the battery cover off
of
the remote control.
2.
Remove the old AAA battery, observing the +/- symbols
on
the
battery, and replace with a new AAA battery.
3.
Gently slide the battery cover on to the back
of
the remote control.
4.
Test operation
of
the remote control.
18
ca6554 Owners
rev
A