Instruction manual

48
VF Menu List
Chapter 4 Menu Configuration and Detailed Settings
4-2-4 Config Menu
Page Configuration
item
Default Settings Remarks
<Switch Assign>
ASSIGN button
function
assignment
Assign 1 Mag Off, Mag, Mag Position,
Hi/Lo Key, Fan Mode,
Rec Review
Off: No function is allocated.
Mag: Displays a magnified image in the
viewfinder and on the SDI OUT
connectors.
Each time the button is pressed, the
magnification changes between 2-
times, 4-times, and Off. When the
magnification is 2-times or 4-times,
the ASSIGN button allocated with the
Mag function is lit.
Mag Position: Selects the position of the
image that is magnified by the Mag
function.
Each time the button is pressed, the
position moves from top left to
bottom right. When the display is
magnified, the ASSIGN button
allocated with the Mag Position
function is lit.
Hi/Lo Key: Temporarily changes LUT for
checking the high-luminance
brightness and low-luminance
darkness of the image in the
viewfinder and from the SDI OUT
connectors. The button toggles
between high-luminance check (gain
reduction), low-luminance check
(gain amplification), and normal.
Fan Mode: Switches the fan operating
mode. For details on the fan
operating mode, see “3-3-9 Selecting
the Fan Operating Mode” (page 30).
Rec Review: Plays the video just
recorded.
Bars: Outputs color bars.
Assign 2 Mag Position
Assign 3 Hi/Lo Key
Assign 4 Rec Review Off, Mag, Mag Position,
Hi/Lo Key, Fan Mode,
Rec Review, Bars
<Fan Mode>
Fan operating
mode select
Fan Mode Auto2 Auto1, Auto2, Min, Max Auto1: Automatic control, according to
the internal temperature.
Auto2: Automatic control, according to
the internal temperature, and
maintains quiet operation when
recording.
Min: Quiet mode, without
synchronization with recording (can
be used at ambient temperatures of
less than 30°C (86°F)).
Max: High-speed mode, fan rotates at
maximum speed.
<Date/Hour
Meter>
Date/Time
settings and
accumulated ON
time display
Date -- yyyy/mm/dd Sets the current date.
Time -- hh:mm Sets the current time.
Hour Meter -- 0H to 99999H Displays the accumulated powered-ON
time since reset from the Service menu.
Date Type Y/Mn/D Y/Mn/D, Mn/D Selects the date display format.