Instruction manual

61
Specifications
Appendix
Specifications
General
Power requirements
10.5 V to 17 V DC
Power consumption
Approx. 65 W with 23.98 PsF
(Mechanical rotary shutter operating.
not including lens, viewfinder)
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Imagers
Imagers Super 35-mm CMOS image sensor
Method Single sensor
Aspect ratio 17:9
Electrical characteristics
Latitude 14-stop
Registration Within 0.02% (not including lens
distortion)
Geometric distortion
Negligible (not including lens
distortion)
Optical system specifications
Lens mount PL Mount
Flange focal length
52.00 mm (–0.03 mm to +0.05 mm
adjustable in 0.01 mm increments by
shim replacement)
Input/output connectors
DC IN LEMO 8-pin male (1), 10.5 V to
17 V DC, 24 V DC
DC OUT 12 V: 11-pin (1), 12 V DC, 4 A
maximum
24 V: 3-pin (1), 24 V DC, 4 A maximum
(The usable current may be limited
depending on the load and input
conditions.)
VF 20-pin (1)
LENS 12-pin (1)
SDI OUT 4:2:2, BNC type (2), HD-SDI signal,
BTA-S004A-compliant, 75 ohms,
0.8 Vp-p, 1.485 Gbps
HD-Y OUT BNC type (1), 75 ohms, 1.0 Vp-p
GENLOCK IN BNC type (1), 75 ohms, SMPTE 274M
HD 3-level sync, 0.6 Vp-p
Or HD-SDI signal, BTA-S004A-
compliant
REMOTE 8-pin (1)
EXT I/O LEMO 5-pin, female (1)
(network) RJ-45 type (1), 10BASE-T, 100BASE-
TX
Lens mount hot shoe
4-pin (2), conforming to ARRI LDS
(Lens Data System) and Cooke /i
Intelligent Electronic Lens System
USB Type A, USB2.0 Hi-Speed (2)
“Memory Stick” (MS)/SD memory card
Combo-connector (1)
Supports “Memory Stick Duo”,
“Memory Stick PRO Duo”
Supports SD memory cards, SDHC
memory cards up to class 10
Supplied accessories
+B3 × 5 screws (4)
Cable clamp belt (1)
Belt bracket (1)
Power cable connector (LEMO 8-pin) (1)
Filter mounting kit (holder, mounting tool,
filter template) (1)
Operation guide (1)
Operation manual (CD-ROM) (1)
Optional accessories
Portable Memory Recorder SR-R4
HD Electronic Viewfinder
HDVF-C30WR (2.7-inch type, color)
Wi-Fi Adapter CBK-WA01
“Memory Stick Duo”
Design and specifications are subject to change without
notice.
Note
Always verify that the unit is operating properly before
use. SONY WILL NOT BE LIABLE FOR DAMAGES
OF ANY KIND INCLUDING, BUT NOT LIMITED
TO, COMPENSATION OR REIMBURSEMENT ON
ACCOUNT OF THE LOSS OF PRESENT OR
PROSPECTIVE PROFITS DUE TO FAILURE OF
THIS UNIT, EITHER DURING THE WARRANTY
PERIOD OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER REASON
WHATSOEVER.