Specifications

www.pulsar.pl PowerSecurity
13
The table of the history of events of the power supply includes information about:
 The time elapsed since the event – the time that has elapsed since the occurrence of the event. For example
4h 54m means that the event occurred 4 hours and 54 minutes ago.
In case of power loss (no 230V AC mains supply) during the PSU operation while the battery is
not connected or fully discharged, the information about the time until the next switch of the
power supply is lost. In such a case, an asterisk symbol appears next to the time display, e.g.
4h 53m *, informing about the situation.
 Event description – event code and its description. Appendixes A, B and C at the end of the manual
summarize all the failure and event codes that may occur during the power supply operation.
The individual codes are accompanied by appropriate optical indication on the panel, acoustic
indication and activation of the dedicated technical output.
 Uaux, Iaux – output voltage and output current saved in the memory at the time of a given event.
The program enables storing the read data for further analysis. Press the button to save the data in
.csv or .dat format, allowing reloading and displaying data in a chart window.
The information about the type of power supply, its position in the manager list and the communication
address can be obtained by pressing the button. This information is particularly useful when importing a file
from another PSU.
4.3.2 Reading the history of events of the power supply with LCD display.
To read the history of events of the power supply with LCD display press the button. The reading starts
from the most recent entries. The reading can be stopped at any time by pressing the button.
Fig. 15. The „History’’ tab.
The table of the history of events of the power supply includes information about:
 Time and date – date and time of the event
 Event description – event code and its description. Appendixes A, B, and C at the end of the manual
summarize all the failure and event codes that may occur during the power supply operation.
The individual codes are accompanied by appropriate optical indication on the panel, acoustic
indication and activation of the dedicated technical output.
 AC – AC 230V power indication:
ON = AC power on
OFF = AC power off
 LB – battery charging indication
ON = battery charging
OFF = no charging, battery fully charged
 EXTi – status of the technical input
ON = input activated
OFF = input not activated