Specifications

www.pulsar.pl PowerSecurity
14
• EPS – technical output indicating AC power loss
open = AC power loss
closed = AC power - OK.
 PSU – technical output indicating PSU failure
open = failure
closed = PSU operation - OK.
 APS – technical output indicating battery failure
open = battery failure
closed = battery OK.
 Uaux (avg)– output voltage, mean value
 Iaux (avg) output current, mean value
 Ubat – battery voltage
Use the “Filter” menu on the toolbar to filter the displayed events by the selected event code.
The program enables storing the read data for further analysis. Press the button to save the data in
.csv or .dat format, allowing reloading and displaying data in a chart window.
The information about the type of power supply, its position in the manager list and the communication
address can be obtained by pressing the button. This information is particularly useful when importing a file
from another PSU.
4.4 Remote battery test
In the „Preview” tab, use the „TEST” button on the battery icon to perform the remote
battery test.
After pressing the button, the battery test command is sent to the power supply. If the
battery is OK, it will be indicated by the ”Battery OK” message once the test is completed. If
the battery is discharged or worn out, it will be indicated by the ”Battery failure” message.
The battery test will not be performed if the PSU is not configured to operate without
battery.