Specifications

www.pulsar.pl PowerSecurity

 Uac – 230V AC mains supply voltage

 Uaux1 – voltage at the AUX1 output

 Uaux2 - voltage at the AUX1 output

 Iaux – total output current

 Tbat – battery temperature

 Rbat – resistance of the battery circuit

Use the “Filter” menu on the toolbar to filter the displayed events by the selected event code.

The program enables storing the read data for further analysis. Press the button to save the data in

.csv or .dat format, allowing reloading and displaying data in a chart window.

The information about the type of power supply, its position in the manager list and the communication

address can be obtained by pressing the button. This information is particularly useful when importing a file

from another PSU

5.4 Remote battery test

In the „Preview” tab, use the „TEST” button on the battery icon to perform the remote

battery test.

After pressing the button, the battery test command is sent to the power supply. If the

battery is OK, it will be indicated by the ”Battery OK” message once the test is completed. If

the battery is discharged or worn out, it will be indicated by the ”Battery failure” message.

After pressing the TEST button, it remains inactive for about 30 seconds before it can

be used again.