Technical data

24
POSSIBLE FAULTS
GRU FASSI
24 POSSIBLE FAULTS
24.1 Generality
Many years experience of our product has allowed us to identify and classify the most
common faults which occur. In most cases it requires accurate hydraulic and electric
troubleshooting and simple rectification. In the following table we report the most fre-
quent inconveniences and our suggested remedies.
(!) Checking and adjustment of oil pressures of valve settings must be carried out
by an authorized service agent, under penalty of warranty forfeiture.
(!) ATTENTION (!)
In the event that the crane ceases to operate and the code "alarm" with a number appears
on the Display B. Call your FASSI authorised service centre reporting the Alarm number
with the crane model and serial numbers. If the fault cannot be cleared follow the procedure
in the chapter "Controls to operate the crane" and overide the dump valve EVI.
THIS IS ONLY A TEMPORARY ACTION FOR EMERGENCIES, the crane should be
taken to a FASSI service centre for repair as soon as possible.
TO OPERATE THE CRANE FOR TOO LONGER PERIOD WITH THE OVERIDE
ACTIVATED MAY INVALIDATE THE CRANE WARRANTY.
24.2 Only operations which can be carried out by the user
Note: Any operation, other than those indicated hereunder, must be performed
only and exclusively by specialized personnel from an authorized support
centre, considering the potential residual risks.
FAULTS CAUSE REMEDIES
The crane does not Vehicle non Stabilize the vehicle
rotate properly in level position
Lack of lubrication - WITH RACK:
Grease the bushes and
the rotation guide shoe
- WITH SLEW RING:
Grease the slew ring
and the pinion gear-
slew ring group
The extension booms Lack of lubrication Grease
do not completely extend of the guide shoes the guide shoes
or work jerkily
Crane controls are Lack of Check the fuse,
not active electric energy the battery and
electric circuit
Winch stroke end See 21.2
active (if fitted)
The rotation limiting See 16.6
device is activated
Vibrations in Shortage of oil Check the level
crane operations and top up
if necessary
Obstructed filters Clean or replace
the filter cartridge
Noteable decrease in Obstructed filters Clean or replace
movement speed the filter cartridge