User manual

MANUAL V3.0
5, 5g & 7
MAIN SETTINGS > P. 60
“Web Browser”
“Normal Standby”: while browsing the web, the ARCHOS will go into Standby
mode according to the setting selected for the “Standby” parameter.
“Prevents Standby”: while browsing the web, the system will never go into
Standby mode.
8.10 “sTOrage” seTTIngs
“Free Storage Space”
displays the amount of free space on the hard drive.
Note: reported number of gigabytes is binary-based counting (1KB=1024
bytes). Thus each reported Gb represents approximately 1.07 gigabytes (deci-
mal). Formatting also takes up space.
“USB preference” (for advanced users)
Your preferred connection mode will be used every time you connect the
ARCHOS to a computer. The connection mode determines how your device inter-
acts with your computer:
Mode 1: “Windows Media Device”: Recommended for users of Windows Media®
Player (WMP) version 10 or higher . When set to this mode, the ARCHOS uses the
Media Transfer Protocol (MTP). It allows you to charge your ARCHOS and transfer
les onto it at the same time. Your ARCHOS will be locked only when it is opened
in Windows® Explorer. You will be able to synchronize your media library auto-
matically every time you connect your ARCHOS to your computer. When your
le transfer is nished, simply unplug the cable from the ARCHOS, and your de-
vice will update the ARCLibrary (Music/Photo libraries).
Mode 2: “PC Hard Drive”: Recommended for users of Windows® XP with Windows
Media® Player 9, Windows® 2000, Me, Mac® OS X or Linux. The ARCHOS will ask
you if you want to charge it or connect it as a mass storage device (Hard Drive).
Choose to connect it as a mass storage device (external hard drive). When con-
nected to your computer, your ARCHOS will be locked. Disconnection: when the le
transfer is over, safely unmount the ARCHOS (See: Disconnecting ) and your device
will do a quick ARCLibrary update (Music/Photo libraries). May not index all les.
-
-
-
-
-
-