Installation guide

13
2012 Audiovox Electronics Corporation. All rights reserved.
Chirp Delete - User Accessible
System ARM/DISARM chirps can be toggled ON or OFF without entering the
programming feature banks.
1. Turn the ignition ON then OFF.
2. Press and release the valet/programming button 3 times. The system
will respond with 1 chirp for ON or 2 chirps for OFF.
Adjusting the Shock Sensor
1. Increase sensitivity by turning the adjustment dial clockwise.
2. Decrease sensitivity by turning the adjustment dial counter clockwise.
Testing the Shock Sensor
Arm the system and wait 6 seconds for the zone to stabilize, then firmly strike
the vehicles bumper.
Feature Bank 3 - 5 Chirps
Output Control
1 LED Flash 2 LED Flash 3 LED Flash 4 LED Flash 5 LED Flash
1 Extended Lock Pulse
1 Second
3.5 Seconds
1 Second
Lock, Double
Pulse Unlock
30 Second
Lock, Double
Pulse Unlock
Double Pulse
Lock, 1
Second Unlock
2 Factory Disarm
Factory
Disarm
2nd Unlock
3 Ignition Controlled Locks
OFF
Lock and
Unlock
Lock Only Unlock Only
4
Trunk Output Timing
Red / White Output
Push and
Hold
10 Seconds 20 Seconds
Latched until
IGN ON
Latched ON
until Button
Press
5 Horn Output Timing
16mS
10mS 30mS 40mS 50mS
6 Real Panic
ON
OFF
7
AUX 1
Violet / Black Output
Push and
Hold
Latched
Latched until
IGN ON
Dome Light
Output