User manual

C007964_01_CR2600_User_Manual

7.1 - Batch Mode via USB

2. Scan one of the following communicaon modes to congure the communicaons seng on your reader:

3. To transmit the captured data to CortexTools™ on your host device, place reader into charging staon. The reader will wait 5

seconds before transming data. The 5 second delay allows the host device to prepare to receive the data.

USB Downloader Mode

USB Keyboard Mode USB Virtual Comm Mode

1. The CR2600 can be congured for Batch Mode to capture and transmit data over standard USB communicaon modes. Select

and scan one of the following conguraon codes that will best suits data storage needs:

Batch Mode Enable

- Scan and Log

Batch Mode Enable

- Log Only

7.2 - Batch Mode Indicators

When the CR2600 is in batch/storage mode, the storage icon will ash every 10 seconds to indicate data is being stored.

If batch memory is full, the storage icon will ash 5 mes every second. Data will need to be downloaded or deleted to free

memory space.

Storage icon will not ash if there is no data stored.

Wireless

Icon

Storage Icon

Good Read

Indicator