User Manual

Step 9 Select the cam which suits your door and frame

and attach it to the square shaft at the end of

the spindle.

Step 10 Now check the operation of the lock using the

factory User Code 00 99.

Step 11 If the lock is functioning correctly, CHANGE

THE DEFAULT MASTER CODE 55 44 33 22 and

DEFAULT USER CODE 00 99 and program the

lock using the programming and operating

instructions enclosed.

B) New installation

Step 1 Place template on door and mark upper 6mm (

”)

hole and lower 16mm (

”) hole.

IMPORTANT NOTE: Before drilling fixing holes, please

ensure that the position of the KitLock when fitted will allow

enough clearance for selected cam to work.

Step 2 Drill both fixing holes.

Step 3 Continue installation from step 4 to 11, above.

II-KL1000RH-0912

CODELOCKS LTD UK

Tel: +44 (0) 1635 239645

Fax: +44 (0) 1635 239644

sales@codelocks.co.uk

Helpline, service & spares

FREEPHONE 0800 393 405

CODELOCKS INC US

Tel: +1 714 979 2900

Fax: +1 714 979 2902

sales@codelocks.us

Help: 1.877.CODELOCK

www.codelocks.com

WWW.KITLOCK.COM

INSTALLATION

INSTRUCTIONS

FOR RIGHT HAND

HORIZONTAL

KITLOCK1000

PAGE 1
Step 9 Select the cam which suits your door and frame and attach it to the square shaft at the end of the spindle. Step 10 Now check the operation of the lock using the factory User Code 00 99. Step 11 If the lock is functioning correctly, CHANGE THE DEFAULT MASTER CODE 55 44 33 22 and DEFAULT USER CODE 00 99 and program the lock using the programming and operating instructions enclosed.
PAGE 2
FITTING INSTRUCTIONS SPECIAL NOTES The KitLock can be fitted to: • A) Cupboards, cabinets and lockers etc as a direct replacement for existing cam locks. efore installing the lock, load the batteries and familiarise yourself B with the operation and programming. • B) I t can also be easily fitted to cupboards and cabinets that do not have an existing locking device. he handle will not turn until you enter the factory default T Master Code 55 44 33 22 OR the User Code 00 99.