Operating instructions

Pag. 6 http://www.coef.it - [e-mail]
CONTROL PANEL
On the control panel of the Sirio 1800DV/2500DV (pict.4) you can find, besides the display, the leds and the but-
tons to use to set the spot.
LED
• “DMX” led flashing: DMX input present
off: no DMX input
• ”LAMP” led flashing: the lamp switching off is remotely controlled
off: lamp switched on
• ”DIMMER” led flashing: the lamp is 33% dimmered
off: lamp switched on
BUTTONS
Four buttons are used to programme the spot:
• MENU to select the programming options
• DOWN to go backward in the selected options
•UP to go forward in the selected options
• ENTER to confirm the selected options
DISPLAY
Shows the various menus and the selected options.
fig.4