Operating instructions

http://www.coef.net - [e-mail] Pag. 3
DANGER SIGNAL: Generic dager signal and electric shock danger signal.
GENERAL WARRANTY CONDITIONS
PACKING CONTENTS
•
The guarantee is valid for a period of 12 months from the date of purchase of the equipment.
•
The guarantee is not valid in case a wrong voltage or frequency is selected.
•
The parts which are proved to have manufacturing defects are also covered by the guarantee.
•
The external parts of the equipment, its removable elements and lamps are excluded from the guarantee; for these
parts we recommend to follow the directions supplied by their manufacturers.
•
The guarantee is not valid in case of tampering or repairs carried out by non-authorized personnel.
•
The replacement of the equipment during the validity of the guarantee is not provided for.
•
The transport freights from and to the manufacturer for repairs under guarantee are at Customer’s charge.
•
When applying for the repair, always mention the serial number and the model of the equipment.
Carefully check the contents of the packaging and the completeness of the components. If any of the parts listed hereunder is
missing, please contact your Dealer immediately:
•
Sirio 150 / 150DV complet unit
•
This user manual
•
Lamp (upon request)
•
Wall fixing plate
PROTECT NATURE.
DO NOT DISPOSE OF THE PACKAGING IN THE ENVIRONMENT.
CAREFULLY KEEP THE BOX AND THE COMPONENTS OF THE PACKAGING FOR ANY DISPLACEMENT
OR RE-SHIPMENT OF THE EQUIPMENT.
Do not leave the packaging elements (polystyrene, nylon, metal parts, etc.) unattended.
TECHNICAL NOTES
• LAMP
Mastercolour CDM-T 150W/942 or CDM-SA/T 150W/942)
Averange lamp life: 6000 hours
Colour temperature: 4200 K
Luminous flux: 14000 lumen
Colour rendering index: 96 Ra
• OPTIC/COLOUR SYSTEM
New concept optical system (patent pending)
Full CYM color mixing, unlimited variety of colours and shades
High resolution stepper motors
Colour crossfades can be programmed at four different speeds or in real time
•DIMMER (for code 02B011 only)
0-100% continuosly variable (256 steps)
• CONTROL INPUT
Interface standard: RS-485; opto-coupled input
Protocol: USITT DMX 512
Stand-alone control: auto mode function master/slave (synchro mode)
• POWER SUPPLY
Rated voltage: 230 Vac • on request: 208 Vac 60 Hz; 200 Vac 50 Hz
Rated frequency: 50 or 60 Hz
Rated current: 1.1A
Rated power: 250 Va
• FUSES
Lamp fuse: 3.15A/250V T (time-delay)
Electronics fuse: 1.6A/250V T (time delay)