Operating instructions

COEF srl Via Albinatico 80-82 - 51019 Ponte Buggianese ( Pistoia ) ITALY pag. 10
3 - COLLEGAMENTI CONNECTIONS
3.1 - Collegamento alimentazione rete - Power supply connections
Alimentare il proiettore collegandolo come indicato in Fig. 7 con tensione e frequenza indicati sul retro del proiettore.
Supply the projector by connecting it as indicated in Fig. 7 with Voltage and Frequency as indicated on the rear of the proj
-
ector.
S/N
CHECK
S/N
CHECK
S/N
CHECK
PHASE
GROUND
NEUTRAL
Figure 6
3.2 - Collegamento DMX 512 - DMX 512 connection
Collegare il proiettore e l’unità di controllo con un ottimo cavo schermato bipolare, corredato di spine e prese Cannon 3 Pin
XRL. Rispettare, secondo la serigrafia riportata sul pannello, gli ingressi e le uscite del segnale DMX 512.
Connect the projector to the control unit by means of a RG58 or RG59 coaxial cable supplied with 3 Pin XRL Cannon plugs
and connectors. Respect, according to the indications on the panel, the input and the output of the DMX 512 signal.
S/N
CHECK
S/N
CHECK
S/N
CHECK
FR
O
M
CO
NTR
O
L
U
NIT
Figure 7