Operating instructions

http://www.coef.net - [e-mail] Pag. 9
MENU FUNCTION SUB-FUNCTION DESCRIPTION
DMX (*) 1 / 255 DMX start channel
TIME
LAMP
MACH
SHOW - KH, H
RESET - GO?
SHOW - KH, H
Lamp working hours (KH=thousands H=hours)
Lamp working hours reset (confirm by ENTER)
Projector working hours (KH=thousands H=hours)
ERR
EOK
E110
E210
E220
E230
E240
E250
E260
E510
E260
W310
W410
NO ERROR
EEPROM failure
Malfunction of the SHUTTER motor
Malfunction of the COLOR motor/sensor
Malfunction of the GOBOS motor/sensor
Malfunction of the GOBOS ROT. motor/sensor
Malfunction of the PAN motor/sensor
Malfunction of the TILT motor/sensor
Malfunction of the PAN Encoder
Malfunction of the TILT Encoder
Checksum Setup not valid
Lamp working hours for more than 1900 hours.
SHUT
HOME
TEST
HOME SHUTTER
TEST SHUTTER
COL
HOME
TEST
CSHUT
MODE
(*) OFF / ON
(*) MOD1 / MOD2
HOME COLOR
TEST COLOR
Color change in black-out position
Color switching or linear wheel motion.
GOBO
HOME
TEST
GSHUT (*) OFF / ON
HOME GOBOS
TEST GOBOS
GOBO change in black-out position
RGOB
HOME
TEST
HOME GOBOS rotation
TEST GOBOS rotation
PAN
HOME
TEST
STRV
ENCO
(*) STND / REV
(*) ON / OFF
HOME PAN movement
TEST PAN movement
Switch movement direction ( DX / SX)
ON/OFF the automatic repositioning of the PAN
TILT
HOME
TEST
STRV
ENCO
(*) STND / REV
(*) ON / OFF
HOME TILT movement
TEST TILT movement
Switch movement direction (UP / DOWN)
ON/OFF the automatic repositioning of the TILT
SCH da CH1 a CH9 0 / 255 DMX value for the indicated channel
LAMP
ONOF
CDMX
ON
OFF
AUTO
(*) NO / YES
LAMP ON
LAMP OFF
LAMP OFF after 1 hour of no change on DMX
LAMP switching on by DMX control
MISC
RSET
RDMX
DSPL
SWPT
CH 8/9
VER
(*) YES / NO
(*) ON / OFF
(*) STND / REV
(*) STND / SWAP
(*)CH8/CH9
MASTER HOME (Starting RESET)
MASTER HOME via DMX control
Display on / Display off
180° rotation of the visualization display
Channel control switch PAN / TILT
Pojector control (8 or 9 channels)
Show the installed software version
(*) default value- factory assigned
4.1 MENU, FUNCTION & SUB-FUNCTION