User Manual

Performing the Initial Setup of MobileID (for Administrators only) - Cogent Systems, Inc. Proprietary Information 9
•
•
•
•
•
•
Chapter 3
Performing the Initial Setup of MobileID
• • • • • •• • • • • •• • • • • •
(for Administrators only)
In order for the two Bluetooth-enabled devices to communicate with each
other, you must perform Bluetooth pairing. When this is accomplished, the
two devices join what is called a trusted pair relationship. When one device
recognizes another device in an established trusted pair, each device
automatically accepts communication, bypassing the discovery and
authentication process that normally happen during Bluetooth interactions.
Pairing the Bluetooth Enabled Devices
The devices are paired after the Pocket PC PDA locates the BlueCheck
capture device.
To pair the Pocket PC PDA with the BlueCheck capture device, follow
these steps:
1 Use the stylus to tap on the Start button, located on the top-left corner
of the
Pocket PC PDA screen. A drop-down menu will be displayed.
2 Select
Settings from the drop-down menu. The Settings window will be
displayed, an example of which is shown in
Figure 3-1.