User Manual

24 Performing a Quick Search Identification - Cogent Systems, Inc. Proprietary Information
•
•
•
•
•
•
Note: If you are not in the BlueCheck device’s Bluetooth range, its attempt
to communicate with MobileID will time out, and the message: NO CONN
RESEND?
will be displayed on the Display Panel . If this message is
displayed, try moving the BlueCheck device closer to the Pocket PC PDA
on which MobileID is installed.
7 Depending on whether the subject’s left thumb is missing/damaged,
take one of the following actions:
• If the left thumb is missing/damaged, press the
Green button
(located above
MIS on the Display Panel).
• If the left thumb is not missing/damaged, have the subject place
his/her left thumb on the fingerprint sensor. The subject’s left
thumbprint will be captured, and the message
Finger Captured
will be displayed on the
Display Panel. The prints are sent to LAFIS
and the quick search identification transaction will be displayed in
the
Transaction Queue window of the Pocket PC PDA, an exam-
ple of which is shown in
Figure 5-3.
Figure 5-3 The New Quick Search Identification Transaction Is Displayed in the Queue