Cogent Systems Instruction of Fusion Cogent Systems -1-
Cogent Systems Table of Contents 1. Power On……………………………………………………………3 2. Log on the Fusion………………………………………………..4 3. Set Time……………………………………………………………..5 4. ‘Home’ Page…………………………………………………………7 4.1. Active Tasks……………………………………………………7 4.2 Settings…………………………………………………………7 4.2.1. GPRS……………………………………………………7 4.2.2. Set Time…………………………………………………8 4.2.3. User Manager……………………………………………8 4.2.4. Wifi………………………………………………………9 5. Other……………………………………………………………………9 5.1. System Info……………………………………………………..9 5.2.
Cogent Systems 1. Power On To turn on the device, press power button for 2-3 seconds, please refer to Figure-1; to shut down the device, simply press the power button for 2-3 seconds again, a window as Figure-2 will turn out to confirm your decision.
Cogent Systems Figure-2 2. Log on the Fusion In order to access the system, you must have a valid user name and password, as Figure-3 shown below. Administrators create user accounts using ‘User Manager’. For details, please refer to 4.2.3. ‘User Manage’.
Cogent Systems 3. Set Time The first time when you power on the device, it will ask you to set the time. Press the shift button ‘NUM’ to enter the year, month, day and son on. Press the ‘____’ button to set TimeZone (Figure-4). Use up-down button to select your location, press ‘Enter’ to select your country, state or city. Press ‘OK’ to save your setting. Then you will enter the main page ‘Home’.
Cogent Systems Up-down Button Functional button, same as enter Functional button, same as cancel Figure-5 -6-
Cogent Systems 4. ‘Home’ Page This is the main page of Fusion, all function icons of Fusion are displayed in this page. 4.1. Active Tasks Select and enter ‘Active Tasks’ in the ‘Home’ page. It is use to check the processing assignment of the device (Figure-6) Figure-6 4.2 Settings 4.2.1. GPRS Select ‘GPRS’. ‘Configure’ is the configuration of GPRS. Select ‘Connect’ to connect the GPRS. Select ‘Disconnect’ to disconnect GPRS (Figure-7). Note: GPRS, Wi-Fi and Bluetooth cannot work together.
Cogent Systems Figure-7 4.2.2. Set Time Make the ‘Set Time’ icon to be selected, press enter to enter into it. It is use to set the time of the device. Press the conversional function button ‘NUM’ to set your time, press the ‘____’ button to set TimeZone. Use up-down button to select your location, press ‘Enter’ to select your country, state or city. Press ‘OK’ to save your setting. Press ‘Cancel’ back to ‘Settings’. 4.2.3. User Manager Use up-down button to select and enter into ‘User Manager’.
Cogent Systems Figure-8 4.2.4. Wifi Use up-down button to select and enter into ‘Wifi’. Press ‘On’ button to turn on the Wifi and search the router. After searching, a list of searched router will display. ‘ENCRYPT’ shows whether the router is encrypted or not. Use up-down button to select router, press ‘Select’ to enter into the router. Press ‘Connect’ to connect the router. Then the link information will be displayed. Press ‘Exit’ back to Wifi window. Press ‘Exit’ back to ‘Settings’. 5. Other 5.1.
Cogent Systems 6. Cogent ‘Cogent’ is the main function of Fusion. It is use to enroll the fingerprint, edit and search the demographics. Use up-down button to select and enter into ‘Cogent’. A window with ‘Enroll’ and ‘Search Only’ option will be displayed. Select the option you wish to operate (Figure-9). Figure-9 6.1. Enroll 6.1.1. Demographics Use up-down button to select ‘Enroll’. Press enter or ‘____’ button to enter into it. You will be asked for entering the demographic details.
Cogent Systems Figure-10 6.1.2. Fingerprints Tenprint is required. Follow the instruction to enroll tenprint, from R Thumb to L Pinkie. If the quality of fingerprint is poor, the system will ask for capture again. If the quality of the image is good, then it will go to capture the next finger. Press ‘Skip’ to skip capturing current fingerprint. Select the reason for skipping current fingerprint. Then press ‘Save’ to go back to the capture mode. Press ‘Back’ to go back to the previous record (Figure-11).
Cogent Systems Figure-11 6.1.3. Photo After capturing the fingerprint, it will go to the next step ‘Photo’ automatically. It will take 5 photos for 5 different face angles. First photo will capture from front face (Figure-12); second is from left 90 degree; third is from left 45 degree; fourth is from right 45 degree and the fifth is from right 90 degree. Select ‘Back’ back to the previous record.
Cogent Systems Figure-12 6.1.4. Iris Camera To capture iris of left and right eye, press ‘Capture’ button. Press ‘Skip’ to skip capturing iris, then select reason for not capturing iris (Figure-13).
Cogent Systems Press ‘Next’, all the information and records will be saved. ‘Packing EBTS, please wait’ will display. After saving the information, it will back to the ‘Cogent’ window (Figure-14). Figure-14 6.2. Search Only Select ‘Search Only’ and enter into it. Capture fingerprint from R Thumb to L Pinkie. If it finds a match in the database, the information will display. If the quality of fingerprint image is poor or fingerprint ‘NotMatch’, it will ask for capturing fingerprint again.
Cogent Systems Figure-15 - 15 -
Cogent Systems 7. GPS Once you select ‘GPS’ it will search your location automatically. 8. Power Control ‘Power Control’ is use to control the switch of GPS, GPRS, WI-FI, bluetooth. Press up-down button to select and enter into ‘Power Control’. Press up-down button to select the switch you want to control, press enter to show the on and off option. Press enter to save your setting. To exit the ‘Power Control’, press ‘Exit’. 9. Battery Select ‘Battery’ to check the battery status.
FCC INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
