User's Manual

（GETDB）
4、 选择其中的记录（ALT 或 CTRL 键可以进行多选）或“Select all”，然后选择
“Upload(Image)”，PC 屏幕提示是否开始，如图（UPLOADSTART），选择“是”，
传输开始，设备 LCD 显示“Start Upload”，将设备内部数据和图象通过 USB-COM
口传输到 PC 端，设备如下图(UPLOADFINISH)；
Choose some of the records(USE ALT or CTRL to select more) or choose “Select all”. Then
press “Upload(Image)”. While the program will give you the message that confirm the
operation.(SEE the picture below). Select “Y”, transmission begins. The LCD on the Reader
will display “Start Upload”. It transfers the data and image inside to the PC through
USB-COM port. The device shows in the following picture(UPLOADFINISH):