User's Manual

209 Fair Oaks Avenue South Pasadena, CA 91030 tel: [phone] fax: [phone]
Appendix A: Hyper Terminal (admin functions):
1, Open: \Start\AllPrograms\Accessories\Communications\HyperTerminal. (see picture 4)
Picture 4
2, Typing in any “Name” in “ Connection Description” windows (for example: test),
then click “ OK” (picture 5).
Picture 5 Picture 6
3, Choosing ” COM1” in “ Connect using” of “ Connect To” windows (make sure the
serial cable is connect to the same port) (picture 6).
4, In “ Port Setting” windows, choosing “ 9600” for Bits per second and “Xon / Xoff”
for “ Flow control”. (picture 7)