User's Manual

209 Fair Oaks Avenue South Pasadena, CA 91030 tel: [phone] fax: [phone]
Signals Defination
Pin1 & Pin3 (Wiegand Out Data 0, Wiegand Out Data 1) 󰷅  󰷅   󰷅    󰷅
Pin2 & Pin4 (Wiegand Out Data 0, Wiegand Out Data 1) 󰷅  󰷅   󰷅    󰷅
Pin5 ( Drvout) 󰷅   󰷅    󰷅   󰷅  󰷅  󰷅  󰷅   󰷅 󰷅     󰷅
Pin6 (Wiegand GND) 󰷅  󰷅 
 󰷅 󰷅      󰷅 󰷅 󰷅  󰷅  󰷅   󰷅 󰷅
Note: About RS485 Terminal Resistor.
Illustrated as figure 2.3, when pin1 & pin2 of JP4 are connected, a 120  󰷅    󰷅 󰷅
resistor is connected on the RS485 BUS.
Figure 2.3 RS485 Terminal Resistor Is connected
 󰷅 󰷅       󰷅 󰷅 󰷅  󰷅  󰷅   󰷅 󰷅