User`s guide

USING VARIABLE COMMANDS
Copyright © 2006, Cognitive. 195
Thermal Transfer Printing with Standard Wax Ribbon
The following label format will set the index detector for thermal
transfer printing using Cognitive's standard wax ribbon:
! 0 0 0 0
VARIABLE INDEX SETTING 2
VARIABLE WRITE
END
Thermal Transfer Printing with Resin Ribbon
The following label format will set the index detector for thermal
transfer printing with typical resin-based ribbon installed:
! 0 0 0 0
VARIABLE INDEX SETTING 3
VARIABLE WRITE
END
Automatic Detect
The following label format causes the printer to automatically set the
index detector to mode 1 or 2 in response to the current print method
(DT or TT) as set by the VARIABLE PRINT_MODE command. This is the
default setting:
! 0 0 0 0
VARIABLE INDEX SETTING 0
VARIABLE WRITE
END