User guide

6 Chapter 2: About the Printer and Imaging
B780 Two-Color Thermal/Impact Hybrid Printer: User Guide B780 UG00001 B 10/06
Printer Congurations
Your printer’s ID code
Look for the printer’s model ID number on the label
attached to the back of the printer. This information is
also shown on the installation quality report card. The
model ID description is shown below.
Communication interfaces
RS-232C serial interface (9-pin)
RS-232C serial interface (25-pin)
Universal Serial Bus (USB)
Combination RS-232C (9-pin) and USB
Combo RS232 (9-Pin) + Eth (Imaging only)
Powered USB
Ethernet only
•
•
•
•
•
•
•
Model
Cust. Part No.
Revision
Serial No.
A776-121D-N000
1 = Gray
7 = Black
2 = 2 MB Flash
X = 12 MB Flash
1 = MICR
0 = Non MICR
D = Dual 9-pin RS-232/USB
W = Powered USB
S = 25-pin Serial
I = 9-pin RS-232C/USB (ION)
E = Ethernet
N = No Logo
T = TPG Logo
0 = No Imaging, Flip
1 = Flip
5 = Imaging
Ithaca, N.Y.
Assembled in
Mexico
Canada
ICES/NMB-003
Class/Classe A
Serial Label Callout.eps
Printer and Imager Specications
Printer Output:
Receipt Station Slip Station
Print Method Direct Thermal, 203 DPI 9-Pin Impact
Character Cell Size 13 x 24, 10 x 24 7 x 7, 12 x 7, 5 x 9
CPI 15.6, 20.3 13.9 & 16.8
Print Columns 44 & 56 42 & 51
Print Line Width 2.8 in. (72 mm) 3.02 in. (76.8 mm)
Printing Speed Monochrome 53.3 LPS (180 mm/sec) 4.8 LPS (16 mm/sec)
Color 26.7 LPS (100 mm/sec)
Character Sets Page 437, 737, 850, 852, 858 (with Eurosymbol), 860, 862, 863, 865, 866, and 1252
(Expanded character sets available)
Bar Codes UPC-A, UPC-E, Code 39, Code 93, Code 128, JAN8 and JAN13 (EAN), Interleaved 2 of 5,
Codabar, PDF 417 (receipt station only)
Auto Cutter Partial Cut