User guide

Chapter 2: About the Printer and Imaging
B780 UG00001 B 10/06 B780 Two-Color Thermal/Impact Hybrid Printer: User Guide
7
Printer and Imager Specications (continued)
MICR Reader:
Character sets/fonts E-13B and CMC-7, auto discriminate (Integrated in slip station)
Check Read Rate 99% minimum
Parsing Formats E-13B only. Programmable to any format
Physical B780 Base Unit
Dimensions (W x D x H) 6.5 in. x 11.4 in. x 6.6 in. (165.10 mm x 289.56 mm x 167.64 mm)
Weight Approximately 8 pounds
Power Requirements 24 VDC, 3 Amps.
Physical B780 Base Unit with Imaging
Dimensions (W x D x H) 6.75 in. x 13 in. x 6.75 in. (171.45 mm x 205.74 mm x 171.45 mm)
Weight Approximately 9.25 pounds
Power Requirements 24 VDC, 3.2 Amps. Either of the power module options (55W or 75W) oered for
the B780 base unit can be used.
Software and Firmware Capability
Emulations Available Application Compatible Escape Commands (ACEC), TPG DH, ColorPOS
®
,
Receiptware ready
Data Buer 8K
User Memory 2 to 12 MB:
shared for graphics, logos, user dened characters, user data storage, and
electronic journal
Communication Board Architecture supports:
Dual 9-Pin RS232/USB, 25-pin RS232, Ethernet, Powered USB
Printer Drivers OLE POS for Windows compatible and Windows 2000,
Java POS, USB
Thermal Paper Requirements:
Paper Type Direct Thermal, POS Grade(s), special requirements for color printing (see Ch 6)
Paper Roll (W x Dia.) 3.15 in. x 3.27 in. (80 mm x 83 mm)
Impact Slip Forms Requirements:
Size 2.75 in. x 5.00 in. (69.85 mm x 127.00 mm) minimum front & side
Maximum Length 11.00 in. (279.4 mm)
Number of Plies 1 - 4 ply multipart
Paper Thickness 0.014 in. maximum (0.35 mm)