Manual

PRINTER SETUP
VARIABLE RECALIBRATE
Function Turns automatic index calibration on or off. If
enabled, automatic index calibration causes the
printer to enter a recalibrate sequence when an
indexing error is detected.
Explicit Form
Implicit Form
VARIABLE RECALIBRATE mode
V RECALIBRATE mode
Parameters
mode ON – enables automatic index
recalibration.
OFF – disables automatic
index recalibration.
? – returns the current
setting.
Comments When using this command, send it to the printer
with VARIABLE WRITE in a non-printing label
format. Do not use this command in stored label
formats.
Example The format below causes the printer to attempt
index calibration when an indexing error is
detected.
! 0 0 0 0
VARIABLE RECALIBRATE ON
VARIABLE WRITE
END
240 Revision F, January 2012, CognitiveTPG