User manual

2.4.1 Focus
If the camera is out of focus, the rapidly updating image on the first page of the wizard can be
used to help bring the camera into focus. The image that appears on the page is a reduced image
from the center of the camera's field of view.
The image on the Focus page displays a number that corresponds to the level of focus. Maximize
this number to properly focus the camera. As proper focus is approached, either by bringing the
image into focus or by maximizing the focus number, additional slight adjustments will bring the
camera into focus.
Note: The focus utility relies on sharp edges in the scene. If possible, make sure the
camera is viewing something in the field of view with sharp edges.
To focus the camera, slowly rotate the lens while you watch the updating image. For Micro-
mount lenses, turn the entire lens. For C-mount and CS-mount lenses, the lens usually contains a
built in focus ring on the outer edge of the lens.
When satisfied with the camera's focus, click the Next>> link that appears near the bottom of the
page.
2.4.2 Image Size and Orientation
Use the second step of the installation wizard to personalize the size of the image, to properly
position the camera so that it provides the desired field of view and to optimize the
characteristics of image.
16 of 60