Operation Manual

42 43
7.1
7.2 7.3
CALIBRATION
Movement Caliber : 5040.D
Adjusting the Chronograph Hands to Zero Position
Example:
One or several chronograph hands are not in their correct zero position
and have to be adjusted
(e.g. following a battery change)
.
➊
Pull out the crown to position 3
(all 3 chronograph hands are in their correct or incorrect zero position)
.
➋
Keep push-buttons A and B depressed simultaneously for at least 2
seconds
(the center stop-second rotates by 360°
➡
corrective mode is activated)
.
Adjusting the center stop second
➡
Single step A1 x short
➡
Continuous A long
➡
Adjusting the
next hand B
➡
Adjusting the 1/10 second counter hand (position 6h)
➡
Single step A1 x short
➡
Continuous A long
➡
Adjusting the next hand B
➡
Adjusting the minute counter (position 9h)
➡
Single step A1 x short
➡
Continuous A long
➌
Returning the crown to position 1. Termination of the chronograph
hands adjustment can be carried out at any time.
➊
➌
A➋
B➋