Operation Manual

ManualsBrandsCoifman ManualsAMCal 7751

Instruction Manual

Summary of content (125 pages)

PAGE 1
Instruction Manual
PAGE 2
Movement Caliber : 1069 PRESENTATION Movement Caliber 1069 Display Elements Minute Hand Hour Hand Second Hand 1 2 Control Buttons Crown Positions: 1. Normal position 2.
PAGE 3
Movement Caliber : 1069 SETTINGS Setting the Time 1.1 Pull the crown to position 2. 1.2 Turn the crown clockwise to set the hour / minute hands to the desired time. 1.1 1.3 Push the crown back to position 1. 4 1.2 1.
PAGE 4
Movement Caliber : 2330 / 130 & 763 PRESENTATION Movement Caliber 2330 /130 & 763 Display Elements Minute Hand Hour Hand 1 2 3 Second Hand Date Control Buttons Crown Positions: 1. Normal position 2. Quick correction of date 3.
PAGE 5
Movement Caliber : 2330 / 130 & 763 SETTINGS Setting the Time 1.1 Pull the crown to position 3. 1.2 Turn the crown clockwise to set the hour / minute hands to the desired time. 1.1 1.3 Push the crown back to position 1. 8 1.2 1.
PAGE 6
Movement Caliber : 2330 / 130 & 763 SETTINGS Quick Correction of Date 3.1 Set the crown to position 2. 3.2 Turn the crown clockwise step-by-step to the desired date. 2.1 3.3 Push the crown back to position 1. !! Attention !! Please Do Not set between 21:00 and 00:30. 10 2.2 2.
PAGE 7
Movement Caliber : 3540.D PRESENTATION Control Buttons Display Elements Push Button A Minute Hand Movement Caliber 3540.D Center Stop-Second 1/10 Second Counter (Hour counter after 30 minutes) Hour Hand 1 2 3 Minute Counter Second Hand Date 12 INFO Battery: 384 (diametaer 7.9mm x 3.6mm / SR 41 Accuracy: +20 / -10 seconds per monthSW) Crown Positions: 1. Normal position 2. Quick correction of date 3.
PAGE 8
Movement Caliber : 3540.D SETTINGS Setting the Time ➊ Pull out the crown to position 3 (the watch stops).* ➋ Turn the crown until you reach the correct time 8:45. ➌ Push the crown back into position 1.* ➊ ➌ ➋ Please note 1.1 1.2 * In order to set the time to the exact second, ➊ must be pulled out when the second hand is in position «60». Once the hour and minute hands have been set, ➌ must be pushed back into position 1 at the exact second.
PAGE 9
Movement Caliber : 3540.D SETTINGS Setting the Date (Quick Mode) ➊ Pull out the crown to position 2 (the watch continues to run). ➋ Turn the crown until the correct date 1 appears. ➌ Push the crown back into position 1. ➊ ➌ ➋ Please note: 2.1 2.2 The date can be changed during the date changing phase between 8:30 PM and 12:00 PM; please note that the date must be set to the date of the following day as in this case, the automatic date changing does not occur at midnight.
PAGE 10
Movement Caliber : 3540.D SETTINGS Setting the Date / Time Example: – Date / time on the watch: 17 / 1:25 AM – Present date / time: 4 / 8:30 PM ➊ ➋ ➌ ➍ ➎ ➏ Pull out the crown to position 2 (the watch continues to run). Turn the crown until yesterday's date appears 3 . Pull out the crown to position 3 (the watch stops).* Turn the crown until the correct date 4 appears. Continue to turn the crown until the correct time 8:30 PM appears.** Push the crown back into position 1. ➊ ➋ 3.
PAGE 11
Movement Caliber : 3540.D FUNCTIONS Chronograph: Basic Function (Start / Stop / Reset) Example: ➊ Start: Press push button A. ➋ Stop: To stop the timing, press push button A once more and read the 3 chronograph counters: 4 min / 38 sek / 7/10 sec ➌ Zero positioning: Press push button B. 20 (The 3 chronograph hands will be reset to their zero position). A➊➋ 4.1 4.
PAGE 12
Movement Caliber : 3540.D FUNCTIONS Chronograph: Accumulated Timing A ➊➋➌➍ Example: ➊ Start: (start timing) ➋ Stop: (e.g. 15 min 5 sec following ➊ ) ➌ Restart: (timing is resumed) ➍ Stop: (e.g. 13 min 5 sec following ➌ ) = 28 min 10 sec (The accumulated measured time is shown)* ➎ Reset: The 3 chronograph hands are returned to their zero position. 5.1 5.
PAGE 13
Movement Caliber : 3540.D FUNCTIONS Chronograph: Intermediate or Interval Timing A ➊➍ Example: ➊ Start: (start timing) ➋ Display interval: e.g. 10 minutes 10 seconds ➌ Making up the measured time: ➍ Stop: (Final time is displayed) ➎ Reset: The 3 chronograph hands are returned to their zero position. (timing continues in the background) (the 3 chronograph hands are quickly advanced to the ongoing measured time). 6.1 B ➋➌ 6.
PAGE 14
Movement Caliber : 3540.D CALIBRATION Adjusting the Chronograph Hands to Zero Position Example: One or several chronograph hands are not in their correct zero position and have to be adjusted (e.g. following a battery change). ➊ Pull out the crown to position 3 ➋ Keep push-buttons A and B depressed simultaneously for at least 2 seconds (the center stop-second rotates by 360° ➡ corrective mode is activated). ➊ 7.1 (all 3 chronograph hands are in their correct or incorrect zero position).
PAGE 15
Movement Caliber : 5040.D PRESENTATION Control Buttons Display Elements Push Button A Minute Hand Movement Caliber 5040.D Center Stop-Second Second Hand Hour Hand Minute Counter 1/10 Second Counter (Hour counter after 30 minutes) Date Window 28 INFO Battery: 395 (diameter 9.5mm x 2.6mm / SR 927 SW) Accuracy: +20 / -10 seconds per month Quick correction of month 1 2 3 Crown Positions: 1. Normal position 2. Quick correction of date 3.
PAGE 16
Movement Caliber : 5040.D SETTINGS Setting the Time ➊ Pull out the crown to position 3 (the watch stops).* ➋ Turn the crown until you reach the correct time 8:45. ➌ Push the crown back into position 1.* ➊ ➌ ➋ Please note 1.1 1.2 * In order to set the time to the exact second, ➊ must be pulled out when the second hand is in position «60». Once the hour and minute hands have been set, ➌ must be pushed back into position 1 at the exact second.
PAGE 17
Movement Caliber : 5040.D SETTINGS Setting the Date (Quick Mode) ➊ Pull out the crown to position 2 (the watch continues to run). ➋ Turn the crown until the correct date 1 appears. ➌ Push the crown back into position 1. ➊ ➌ ➋ Please note: The date can be changed during the date changing phase between 8:30 PM and 12:00 PM; please note that the date must be set to the date of the following day as in this case, the automatic date changing does not occur at midnight. 32 2.1 2.
PAGE 18
Movement Caliber : 5040.D SETTINGS Setting the Date / Time Example: – Date / time on the watch: 17 / 1:25 AM – Present date / time: 4 / 8:30 PM ➊ Pull out the crown to position 2 (the watch continues to run). Turn the crown until yesterdays date appears 3 . ➌ Pull out the crown to position 3 (the watch stops).* ➍ Turn the crown until the correct date 4 appears. ➎ Continue to turn the crown until the correct time 8:30 PM appears.** ➏ Push the crown back into position 1. Please note: ➊ ➋ 3.1 3.
PAGE 19
Movement Caliber : 5040.D FUNCTIONS Chronograph: Basic Function (Start / Stop / Reset) Example: ➊ Start: Press push button A. ➋ Stop: to stop the timing, press push button A once more and read the 3 chronograph counters: 4 min / 38 sek / 7/10 sec ➌ Zero positioning: Press push button B. 36 (The 3 chronograph hands will be reset to their zero position). A➊➋ 4.1 4.
PAGE 20
Movement Caliber : 5040.D FUNCTIONS Chronograph: Accumulated Timing A ➊➋➌➍ Example: ➊ Start: (start timing) ➋ Stop: (e.g. 15 min 5 sec following ➊ ) ➌ Restart: (timing is resumed) ➍ Stop: (e.g. 13 min 5 sec following ➌ ) = 28 min 10 sec (The accumulated measured time is shown)* ➎ Reset: The 3 chronograph hands are returned to their zero position. 5.1 5.
PAGE 21
Movement Caliber : 5040.D FUNCTIONS Chronograph: Intermediate or Interval Timing A ➊➍ Example: ➊ Start: (start timing) ➋ Display interval: e.g. 10 minutes 10 seconds ➌ Making up the measured time: ➍ Stop: (Final time is displayed) ➎ Reset: The 3 chronograph hands are returned to their zero position. (timing continues in the background) (the 3 chronograph hands are quickly advanced to the ongoing measured time). 6.1 B ➋➌ 6.
PAGE 22
Movement Caliber : 5040.D CALIBRATION Adjusting the Chronograph Hands to Zero Position Example: One or several chronograph hands are not in their correct zero position and have to be adjusted (e.g. following a battery change). ➊ Pull out the crown to position 3 ➋ Keep push-buttons A and B depressed simultaneously for at least 2 seconds (the center stop-second rotates by 360° ➡ corrective mode is activated). ➊ 7.1 (all 3 chronograph hands are in their correct or incorrect zero position).
PAGE 23
Movement Caliber : 6497 PRESENTATION Movement Caliber 6497 Display Elements Minute Hand Hour Hand Second Hand 1 2 Control Buttons Crown Positions: 1. Normal position 2.
PAGE 24
Movement Caliber : 6497 SETTINGS Setting the Time 1.1 Pull the crown to position 2. 1.2 Turn the crown clockwise to set the hour / minute hands to the desired time. 1.1 1.3 Push the crown back to position 1. 46 1.2 1.
PAGE 25
Movement Caliber : 7004.P PRESENTATION Movement Caliber 7004.P Display Elements Date Minute Hand Day 1 2 3 Hour Hand Second Hand Control Buttons Crown Positions: 1. Normal position 2. Setting of hour, minute, day 48 INFO Battery: 381 (diameter 11.6mm x 2.
PAGE 26
Movement Caliber : 7004.P SETTINGS Setting the Time 1.1 Pull the crown to position 3. 1.2 Turn the crown to set the hour / minute hands to the desired time. 1.1 1.3 Push the crown back to position 1. 50 1.2 1.
PAGE 27
Movement Caliber : 7004.P SETTINGS Setting the Date (Quick Mode) 2.1 Pull the crown to position 2. 2.2 Turn the crown clockwise. Continue to turn the crown until the desired date is set. 2.1 2.3 Push the crown back to position 1. Please note: An extreme acceleration in setting the date with quick mode can create a false date indication. The synchronization is re-established by setting the date from 01 till 31 (crown position 2). 52 2.2 2.
PAGE 28
Movement Caliber : 7004.P SETTINGS Setting the Day (Quick Mode) 3.1 Set the crown to position 3. 3.2 Turn the crown clockwise to advance the day hand until the desired day is set. 3.1 3.3 Push the crown back to position 1. Please note: 70% of power is saved when the crown is pulled out. 54 3.2 3.
PAGE 29
Movement Caliber : 7750 PRESENTATION Movement Caliber 7750 Display Elements 30 Minute Counter Minute Hand Hour Hand 1 2 3 Second Hand 60 Second Hand Day Date 56 Control Buttons Crown Positions: 1. Normal position 2.
PAGE 30
Movement Caliber : 7750 SETTINGS Crown 3 Positions Rapid date and day correction is not possible between 8 p.m. and 2 a.m. A 1. Normal running of watch and hand-winding 2. Rapid correction of the date Rapid correction of the day 3. Position for setting the time with stop second and correction of the date at every passing of midnight 1.1 B Please note: The movement of the wrist winds the watch.
PAGE 31
Movement Caliber : 7750 FUNCTIONS Simple Timing Function Setting crown in position 1 ➊ to ➌ order of functions ➊ START ➋ STOP : Read time ➌ Reset to zero - 2 hours, 10 minutes, 8 seconds 60 ➊ ➋ 2.
PAGE 32
Movement Caliber : 7750 FUNCTIONS ADD Function Setting crown in position 1 to order of functions ➊ START ➋ STOP Read ➌ RESTART ➍ STOP Read ➎ RESTART ➏ STOP Read • • • Reset to zero ➊ 62 ➊ ➋ ➌ ➍ ➎ •• ➏ • ••• 3.
PAGE 33
Movement Caliber : 7751 PRESENTATION Control Buttons Display Elements Push Button C (Option) Minute Hand Quick correction of day Month Indicator Movement Caliber 7751 Push Button A Quick correction of date. 30 Minute Counter Day Indicator Hand Hour 1 2 3 Second Hand 24 Hour Hand 60 Second Hand Moon Phase Indicator 12 Hour Counter Date Hand 64 Crown Positions: 1. Normal position 2.
PAGE 34
Movement Caliber : 7751 SETTINGS Crown 3 Positions Date correction is not recommended between 10 p.m. and 2 p.m. The moon phase cannot be corrected between 3 a.m. and 4 a.m. A 1. Normal running of watch and hand-winding 2. Rapid correction of the date Rapid correction of the moon phase 3. Position for setting the time with stop second and correction of the date at every passing of midnight 1.1 B Please note: The movement of the wrist winds the watch.
PAGE 35
Movement Caliber : 7751 FUNCTIONS Simple Timing Function Setting crown in position 1 ➊ to ➌ order of functions ➊ START ➋ STOP : Read time ➌ Reset to zero - 4 hours, 10 minutes, 8 seconds 68 ➊ ➋ 2.
PAGE 36
Movement Caliber : 7751 FUNCTIONS ADD Function Setting crown in position 1 to order of functions START ➋ STOP Read ➌ RESTART ➍ STOP Read ➎ RESTART ➏ STOP Read • • • Reset to zero ➊ ➊ ➊ 70 ➋ ➌ ➍ ➎ •• ➏ • ••• 3.
PAGE 37
Movement Caliber : 8040.N Control Buttons Display Elements Push Button A Minute Hand Movement Caliber 8040.N Day Hour Hand Minute Counter Center Stop-Second 1 2 3 Second Hand 1/10 Second Counter (Hour counter after 30 minutes) Date 72 INFO Battery: 384 (diametaer 7.9mm x 3.6mm / SR 41 Accuracy: +20 / -10 seconds per monthSW) Crown Positions: 1. Normal position 2. Quick correction of date 3.
PAGE 38
Movement Caliber : 8040.N SETTINGS Setting the Time ➊ Pull out the crown to position 3 (the watch stops).* ➋ Turn the crown until you reach the correct time 8:45. ➌ Push the crown back into position 1.* Please note * In order to set the time to the exact second, ➊ must be pulled out when the second hand is in position «60». Once the hour and minute hands have been set, ➌ must be pushed back into position 1 at the exact second. 74 ➊ ➌ ➋ 1.1 1.
PAGE 39
Movement Caliber : 8040.N SETTINGS Setting the Date (Quick Mode) ➊ Pull out the crown to position 2 (the watch continues to run). ➋ Turn the crown counter clockwise until the correct date 1 appears. ➌ Push the crown back into position 1. Please note: During the date changing phase between 9 PM and 12 PM; the date must be set to the date of the following day. An extreme acceleration in setting the date with quick mode can create a false date indication.
PAGE 40
Movement Caliber : 8040.N SETTINGS Setting the Date / Weekday and Time Example: – Date / time on the watch: 17 / 1:25 AM / MON – Present date / time: 23 / 20:30 PM / SAT ➊ ➋ ➌ ➍ ➎ ➏ ➐ ➑ Pull out the crown to position 3 (the watch stops). Turn the crown until yesterday’s weekday FRI appear. Pull out the crown to position 3. Turn the crown backwards until yesterday’s date appears 22 . Pull out the crown to position 3 (the watch stops).* Turn the crown until the correct date 23 and weekday SAT appears.
PAGE 41
➊ ➋ 3.1 3.2 ➏ ➌ 3.3 3.
PAGE 42
Movement Caliber : 8040.N FUNCTIONS Chronograph: Basic Function (Start / Stop / Reset) Example: ➊ Start: Press push button A. ➋ Stop: To stop the timing, press push button A once more and read the 3 chronograph counters: 4 min / 38 sek / 7/10 sec ➌ Zero positioning: Press push button B. 80 (The 3 chronograph hands will be reset to their zero position). A➊➋ 4.1 4.
PAGE 43
Movement Caliber : 8040.N FUNCTIONS Chronograph: Accumulated Timing A ➊➋➌➍ Example: ➊ Start: (start timing) ➋ Stop: (e.g. 15 min 5 sec following ➊ ) ➌ Restart: (timing is resumed) ➍ Stop: (e.g. 13 min 5 sec following ➌ ) = 28 min 10 sec (The accumulated measured time is shown)* ➎ Reset: The 3 chronograph hands are returned to their zero position. 5.1 5.
PAGE 44
Movement Caliber : 8040.N FUNCTIONS Chronograph: Intermediate or Interval Timing A ➊➍ Example: ➊ Start: (start timing) ➋ Display interval: e.g. 10 minutes 10 seconds ➌ Making up the measured time: ➍ Stop: (Final time is displayed) ➎ Reset: The 3 chronograph hands are returned to their zero position. (timing continues in the background) (the 3 chronograph hands are quickly advanced to the ongoing measured time). 6.1 B ➋➌ 6.
PAGE 45
Movement Caliber : 8040.N CALIBRATION Adjusting the Chronograph Hands to Zero Position Example: One or several chronograph hands are not in their correct zero position and have to be adjusted (e.g. following a battery change). ➊ Pull out the crown to position 3 ➋ Keep push-buttons A and B depressed simultaneously for at least 2 seconds (the center stop-second rotates by 360° ➡ corrective mode is activated). ➊ 7.1 (all 3 chronograph hands are in their correct or incorrect zero position).
PAGE 46
Movement Caliber : 8171 / 204 PRESENTATION Display Elements Control Buttons Push Button A Second Hand Movement Caliber 8171 / 204 30 Minute Totalizer Hour Hand Chronogaph Hand 1/5 Second Moon Phase Indicator Date Window 88 395-SR 927W INFO Battery: Service Life Battery : Without chrono = 57 months, with chrono 1H/D = 41 months 031213 1 IM - B Start / Stop Minute Hand 1 2 3 Crown Positions: 1. Normal position 2. Quick correction of date 3.
PAGE 47
Movement Caliber : 8171 / 204 SETTINGS To Correct the Date Caution: Never correct date between 9pm and 0:30am. Setting the Time Set 1.1 90 Reset 1.2 Set 2.1 Reset 2.
PAGE 48
Movement Caliber : 8171 / 204 SETTINGS To Correct the Moonphase Set the date according to the last full moon. Afterwards adapt like steps 3.1 and 3.2. 3.1 92 3.
PAGE 49
Movement Caliber : 8171 / 204 A FUNCTIONS After 2 hours of continuous running, the chrono stops and resets automatically to save the battery. 4.1 A 94 4.2 4.
PAGE 50
Restart Movement Caliber : 8171 / 204 FUNCTIONS Measuring Split Times Start Split B 5.3 A Stop Reset A 5.1 96 5.2 B 5.4 5.
PAGE 51
Movement Caliber : 8171 / 204 CALIBRATION After Battery Exchange or Mishandling Only To reset chronograph, minute and second chronograph. Mintue Second A Enter 6.1 98 B Exit 6.2 B 6.3 6.
PAGE 52
Movement Caliber : 8172 / 220 PRESENTATION Control Buttons Display Elements Push Button A Second Hand Movement Caliber 8172 / 220 Hour Hand 30 Minute Counter Chronograph Hand 1/5 Second Day 395-SR 57 INFO Battery: Service Life Battery: Without chrono = 57 months, with chrono 1H/D = 41 month 0312141 IM - B 100 Start / Stop Minute Hand 1 2 3 Crown Positions: 1. Normal position 2. Quick correction of date 3.
PAGE 53
Movement Caliber : 8172 / 220 SETTINGS Setting the Time To Correct the Day Set 1.1 102 Reset 1.2 Set 2.1 Reset 2.
PAGE 54
Movement Caliber : 8172 / 220 SETTINGS Setting the Date Caution: Never correct date between 9pm and 0:30am. 3.1 104 3.
PAGE 55
Movement Caliber : 8172 / 220 A FUNCTIONS After 2 hours of continuous running, the chrono stops and resets automatically to save the battery. 4.1 A 106 4.2 4.
PAGE 56
Restart Movement Caliber : 8172 / 220 FUNCTIONS Measuring Split Times Start Split B 5.3 A Stop Reset A 5.1 108 5.2 B 5.4 5.
PAGE 57
Movement Caliber : 8172 / 220 CALIBRATION After Battery Exchange or Mishandling Only To reset chronograph, minute and second chronograph. Mintue Second A Enter 6.1 110 B Exit 6.2 B 6.3 6.
PAGE 58
Movement Caliber : 9231 / 1890 PRESENTATION Control Buttons Movement Caliber 9231 / 1890 Push Button A Display Elements Minute Hand Hour Hand Day 1 2 Second Hand Date INFO Battery: 371 – SR920SW 112 Crown Positions: 1. Normal position 2.
PAGE 59
Movement Caliber : 9231 / 1890 SETTINGS Setting the Time 1.1 Pull the crown to position 2. 1.2 Turn the crown clockwise to set the hour / minute hands to the desired time. 1.1 1.3 Push the crown back to position 1. 114 1.2 1.
PAGE 60
Movement Caliber : 9231 / 1890 SETTINGS Setting the Date 2.1 Pull the crown to position 2. 2.2 Turn the crown clockwise. Continue to turn the crown until the desired date is set. 2.1 2.3 Push the crown back to position 1. 116 2.2 2.
PAGE 61
Movement Caliber : 9231 / 1890 SETTINGS Quick Correction of Date 3.1 Set the crown to position 1. 3.2 Press A step-by-step to advance the date until the desired date is set. !! Attention !! The date advances at 00:00 midnight, not 12:00 noon. 118 3.1 3.
PAGE 62
Movement Caliber : 9231 / 1890 SETTINGS Setting the Day 4.1 Pull the crown to position 2. 4.2 Turn the crown clockwise to advance the day hand until the desired day is set. The day hand will advance one day when 04:00 in the morning is reached. 4.1 4.3 Push the crown back to position 1. 120 4.2 4.
PAGE 63
Movement Caliber : 9231 / 1900 PRESENTATION Control Buttons Display Elements Movement Caliber 9231 / 1900 Push Button A Minute Hand Hour Hand Day Second Hand 1 2 Sun and Moon Date Crown Positions: 1. Normal position 2.
PAGE 64
Movement Caliber : 9231 / 1900 SETTINGS Setting the Time, Sun and Moon 1.1 Pull the crown to position 2. 1.2 Turn the crown clockwise to set the hour / minute hands and Sun and Moon to the desired time. 1.1 1.3 Push the crown back to position 1. 124 1.2 1.
PAGE 65
Movement Caliber : 9231 / 1900 SETTINGS Setting the Date 2.1 Pull the crown to position 2. 2.2 Turn the crown clockwise. Continue to turn the crown until the desired date is set. 2.1 2.3 Push the crown back to position 1. 126 2.2 2.
PAGE 66
Movement Caliber : 9231 / 1900 SETTINGS Quick Correction of Date 3.1 Set the crown to position 1. 3.2 Press A step-by-step to advance the date until the desired date is set. !! Attention !! The date advances at 00:00 midnight, not 12:00 noon. 128 3.1 3.
PAGE 67
Movement Caliber : 9231 / 1900 SETTINGS Setting the Day 4.1 Pull the crown to position 2. 4.2 Turn the crown clockwise to advance the day hand until the desired day is set. The day hand will advance one day when 04:00 in the morning is reached. 4.1 4.3 Push the crown back to position 1. 130 4.2 4.
PAGE 68
Movement Caliber : 9232 / 1920 PRESENTATION Control Buttons Display Elements Push Button A Month Movement Caliber 9232 / 1920 Hour Hand Day Second Hand Second time zone / 24 hour Date INFO Battery: 371 – SR920SW 132 Quick correction of month Minute Hand 1 2 3 Crown Positions: 1. Normal position 2. Quick correction of date 3.
PAGE 69
Movement Caliber : 9232 / 1920 SETTINGS Setting the Time and 24 Hour 1.1 Pull the crown to position 3. 1.2 Turn the crown clockwise to set the hour, minute and 24 hour hands to the desired time. 1.1 1.3 Push the crown back to position 1. 134 1.2 1.
PAGE 70
Movement Caliber : 9232 / 1920 SETTINGS Setting the Second Time Zone 2.1 Set the crown to position 1. 2.2 Press B step-by-step to advance the hand of the second time zone by one hour per step until the desired time is set. 2.1 2.3 Stop pressing the button when finished setting the time zone. 136 2.2 2.
PAGE 71
Movement Caliber : 9232 / 1920 SETTINGS Setting the Date 3.1 Pull the crown to position 3. 3.2 Turn the crown clockwise. The date will advance 1 day when the time reaches 00:00 midnight. Continue to turn the crown until the desired date is set. 3.1 3.3 Push the crown back to position 1. 138 3.2 3.
PAGE 72
Movement Caliber : 9232 / 1920 SETTINGS Quick Correction of Date 4.1 Pull the crown out to position 2. 4.2 Turn the crown clockwise step-by-step to the desired date. 4.1 4.3 Push the crown back to position 1. !! Attention !! Please Do Not set between 21:00 and 00:30. 140 4.2 4.
PAGE 73
Movement Caliber : 9232 / 1920 SETTINGS Setting the Day 5.1 Pull the crown to position 3. 5.2 Turn the crown clockwise to advance the day hand until the desired day is set. The day hand will advance one day when 04:00 in the morning is reached. 5.1 5.3 Push the crown back to position 1. 142 5.2 5.
PAGE 74
Movement Caliber : 9232 / 1920 SETTINGS Quick Correction of Day 6.1 Set the crown to position 1. 6.2 Press A step-by-step to adjust the month to the desired one. 6.1 6.3 Release the button after completing the setting. !! Attention !! Please Do Not use Quick Correction on 31st of each month. 144 6.2 6.
PAGE 75
Movement Caliber : 9232 / 1930 PRESENTATION Control Buttons Push Button A Display Elements Quick correction of month Month Movement Caliber 9232 / 1930 Minute Hand Hour Hand Second Hand Second time zone / 24 hour Date INFO Battery: 371 – SR920SW 146 1 2 3 Crown Positions: 1. Normal position 2. Quick correction of date 3.
PAGE 76
Movement Caliber : 9232 / 1930 SETTINGS Setting the Time and 24 Hour 1.1 Pull the crown to position 3. 1.2 Turn the crown clockwise to set the hour, minute and 24 hour hands to the desired time. 1.1 1.3 Push the crown back to position 1. 148 1.2 1.
PAGE 77
Movement Caliber : 9232 / 1930 SETTINGS Setting the Second Time Zone 2.1 Set the crown to position 1. 2.2 Press B step-by-step to advance the hand of the second time zone by one hour per step until the desired time is set. 2.1 2.3 Stop pressing the button when finished setting the time zone. 150 2.2 2.
PAGE 78
Movement Caliber : 9232 / 1930 SETTINGS Setting the Date 3.1 Pull the crown to position 3. 3.2 Turn the crown clockwise. The date will advance 1 day when the time reaches 00:00 midnight. Continue to turn the crown until the desired date is set. 3.1 3.3 Push the crown back to position 1. 152 3.2 3.
PAGE 79
Movement Caliber : 9232 / 1930 SETTINGS Quick Correction of Date 4.1 Pull the crown out to position 2. 4.2 Turn the crown clockwise step-by-step to the desired date. 4.1 4.3 Push the crown back to position 1. !! Attention !! Please Do Not set between 21:00 and 00:30. 154 4.2 4.
PAGE 80
Movement Caliber : 9232 / 1930 SETTINGS Setting the Day 5.1 Pull the crown to position 3. 5.2 Turn the crown clockwise to advance the day hand until the desired day is set. The day hand will advance one day when 04:00 in the morning is reached. 5.1 5.3 Push the crown back to position 1. 156 5.2 5.
PAGE 81
Movement Caliber 9232 / 1950 INFO Battery: 371 – SR920SW 158
PAGE 82
Movement Caliber : 9232 / 1950 PRESENTATION Display Elements Minute Hand Hour Hand Day 1 2 3 Second Hand Date Control Buttons Crown Positions: 1. Normal position 2. Quick correction of date 3.
PAGE 83
Movement Caliber : 9232 / 1950 SETTINGS Setting the Time 1.1 Pull the crown to position 2. 1.2 Turn the crown clockwise to set the hour / minute hands to the desired time. 1.1 1.3 Push the crown back to position 1. 160 1.2 1.
PAGE 84
Movement Caliber : 9232 / 1950 SETTINGS Setting the Date 2.1 Pull the crown to position 2. 2.2 Turn the crown clockwise. Continue to turn the crown until the desired date is set. 2.1 2.3 Push the crown back to position 1. 162 2.2 2.
PAGE 85
Movement Caliber : 9232 / 1950 SETTINGS Quick Correction of Date 3.1 Set the crown to position 2. 3.2 Turn the crown clockwise step-by-step to the desired date. 3.1 3.3 Push the crown back to position 1. !! Attention !! Please Do Not set between 21:00 and 00:30. 164 3.2 3.
PAGE 86
Movement Caliber : 9232 / 1950 SETTINGS Setting the Day 4.1 Pull the crown to position 2. 4.2 Turn the crown clockwise to advance the day hand until the desired day is set. The day hand will advance one day when 04:00 in the morning is reached. 4.1 4.3 Push the crown back to position 1. 166 4.2 4.
PAGE 87
Movement Caliber : 9238 / 1960 PRESENTATION Control Buttons Push Button A Quick correction of month Movement Caliber 9238 / 1960 Display Elements Minute Hand Hour Hand Second Hand 24-Hour / Second Time Zone Date INFO Battery: 371 – SR920SW 168 1 2 Crown Positions: 1. Normal Running 2.
PAGE 88
Movement Caliber : 9238 / 1960 SETTINGS Setting the Time and 24 Hour 1.1 Pull the crown to position 2. 1.2 Turn the crown clockwise to set the hour, minute and 24 hour hands to the desired time. 1.1 1.3 Push the crown back to position 1. 170 1.2 1.
PAGE 89
Movement Caliber : 9238 / 1960 SETTINGS Setting the Second Time Zone 2.1 Set the crown to position 1. 2.2 Press B step-by-step to advance the hour hand of the second time zone until the desired time is set. 2.1 2.3 Release the button once set. !!Attention!! When using push button B to set the second time zone hour, the center minute hand must be set to between 55th minute and 05th minute at any hour. 172 2.2 2.
PAGE 90
Movement Caliber : 9238 / 1960 SETTINGS Quick Correction of Date 3.1 Pull the crown to position 2. 3.2 Turn the crown clockwise. Continue to turn the crown until the desired date is set. 3.1 3.3 Push the crown back to position 1. 174 3.2 3.
PAGE 91
Movement Caliber : 9238 / 1960 SETTINGS Quick Correction of Date 3.1 Set the crown to position 1. 3.2 Press A step-by-step to advance the date until the desired date is set. !!Attention!! The date advances at 00:00 midnight, not 12:00 noon. 176 4.1 4.
PAGE 92
Movement Caliber : 9238 / 1970 PRESENTATION Control Buttons Display Elements Push Button C (Option) Minute Hand Movement Caliber 9238 / 1970 178 Quick correction of date Day Second Hand Date 24-hour / second time zone INFO Battery: 371 – SR920SW Quick correction of day Push Button A Hour Hand 1 2 Crown Positions: 1. Normal Running 2.
PAGE 93
Movement Caliber : 9238 / 1970 SETTINGS Setting the Time and 24 Hour 1.1 Pull the crown to position 2. 1.2 Turn the crown clockwise to set the hour, minute and 24 hour hands to the desired time. 1.1 1.3 Push the crown back to position 1. 180 1.2 1.
PAGE 94
Movement Caliber : 9238 / 1970 SETTINGS Setting the Second Time Zone 2.1 Set the crown to position 1. 2.2 Press B step-by-step to advance the hand of the second time zone by one hour per step until the desired time is set. 2.1 2.3 Release the button after completing the setting. !! Attention !! When using push button B to set the second time zone hour, the center minute hand must be set to between 55th minute and 05th minute at any hour. 182 2.2 2.
PAGE 95
Movement Caliber : 9238 / 1970 SETTINGS Setting the Date 3.1 Pull the crown to position 2. 3.2 Turn the crown clockwise. Continue to turn the crown until the desired date is set. 3.1 3.3 Push the crown back to position 1. 184 3.2 3.
PAGE 96
Movement Caliber : 9238 / 1970 SETTINGS Quick Correction of Date 4.1 Set the crown to position 1. 4.2 Press A step-by-step to advance the date until the desired date set. 4.1 !! Attention !! The date advances at 00:00 midnight, not 12:00 noon. 186 4.2 4.
PAGE 97
Movement Caliber : 9238 / 1970 SETTINGS Setting the Day 5.1 Pull the crown to position 2. 5.2 Turn the crown clockwise to advance the day hand until the desired day is set. The day hand will advance one day when 04:00 in the morning is reached. 5.1 5.3 Push the crown back to position 0. 188 5.2 5.
PAGE 98
Movement Caliber : 9238 / 1970 SETTINGS Quick Correction of Day 6.1 Set the crown to position 1. 6.2 Press A step-by-step to adjust the month to the desired one. 6.1 6.3 Press C twice to advance the day hand by one step until the desired day is set. !! Attention !! Do not use Quick Correction to set the Day between 22:00 at night and 6:00 in the morning. 190 6.2 6.
PAGE 99
Movement Caliber : 9239 / 0005 PRESENTATION Control Buttons Push Button A Display Elements Movement Caliber 9239 / 0005 Minute Hand Hour Hand Day Second Hand 1 2 Date Sun and Moon Crown Positions: 1. Normal position 2.
PAGE 100
Movement Caliber : 9239 / 0005 SETTINGS Setting the Time 1.1 Pull the crown to position 2. 1.2 Turn the crown clockwise to set the hour / minute hands to the desired time. 1.1 1.3 Push the crown back to position 1. 194 1.2 1.
PAGE 101
Movement Caliber : 9239 / 0005 SETTINGS Setting the Day 2.1 Pull the crown to position 2. 2.2 Turn the crown clockwise to advance the day hand until the desired day is set. The day hand will advance one day when 04:00 in the morning is reached. 2.1 2.3 Push the crown back to position 1. 196 2.2 2.
PAGE 102
Movement Caliber : 9239 / 0005 SETTINGS Quick Correction of Date 3.1 Set the crown to position 1. 3.2 Press A step-by-step to advance the date until the desired date is set. 3.1 !! Attention !! The date advances at 00:00 midnight, not 12:00 noon. 198 3.2 3.
PAGE 103
Movement Caliber : 9239 / 0005 SETTINGS Setting the Second Time Zone 4.1 Set the crown to position 1. 4.2 Press B step-by-step to advance the hand of the second time zone by one hour per step until the desired time is set. 4.1 4.3 Release the button after completing the setting. 200 4.2 4.
PAGE 104
Movement Caliber : ETA G15.261 PRESENTATION Control Buttons Push Button A Display Elements Start / Stop 5 Minute Counter Movement Caliber ETA G15.261 Minute Hand 60 Minute Counter Hour Hand 1 2 3 30 Second Counter Second Hand Date Indicator Crown Positions: 1. Normal position 2. Quick correction of date 3.
PAGE 105
Movement Caliber : ETA G15.261 SETTINGS Setting the Counters to Zero Setting crown in position 2 or 3 A 1.1 B. Set the hand of the 60 minute counter to zero 1.2 A. Set the hand of the 30 second counter to zero B. Set the hand of the 5 minute counter to zero 1.1 204 B 1.
PAGE 106
Movement Caliber : ETA G15.261 SETTINGS Crown 3 Positions 1. Normal running of watch 2. Rapid correction of the date 3. Position for setting the time with stop second and correction of the date at every passing or midnight. Please note: Setting crown in position 3 : STOP-SECOND 206 2.
PAGE 107
Movement Caliber : ETA G15.261 FUNCTIONS Simple Timing Function Chronograph stops after 2 hours. ➊ to ➌ order ➊ ➊ of functions ➋ START STOP STOP: Read time - 5 minutes, 57 seconds ➋ ➌ Reset to zero 3.1 ➌ WARNING Before starting the time, put the chronograph hands back to their original position. If necessary, see paragraph "Setting The Timers To Zero".
PAGE 108
Movement Caliber : ETA G15.261 FUNCTIONS ADD Function Setting crown in position 1 to order of functions ➊ START ➋ STOP Read ➌ RESTART ➍ STOP Read ➎ RESTART ➏ STOP Read • • • Reset to zero ➊ 210 ➊ ➋ ➌ ➍ ➎ ➏ 4.
PAGE 109
Movement Caliber : ETA G15.261 FUNCTIONS A ➊ SPLIT-TIME or INTERMEDIATE TIMES Function Setting crown in position 0 ➊ to order of functions ➊ START ➋ SPLIT 1: Read time 1 - 6 minutes, 4 seconds ➌ RESTART (catching-up) ➍ SPLIT 2: Read time 2 - 15 minutes, 36 seconds ➎ RESTART (catching-up) STOP: Read FINAL TIME - 25 minutes, 18 seconds Reset to zero 212 ➋ 5.1 5.3 ➍ B ➎ 5.2 B ➌ 5.
PAGE 110
Movement Caliber : 8171 / 201 PRESENTATION Control Buttons Push Button A Display Elements Start / Stop Second Hand Movement Caliber 8171 / 201 Minute Hand 30 Minute Totalizer 1 Hour Hand Chronogaphe Hand 1/5 Second Date Window INFO 214 Battery: 395-SR 927W Service Life Battery: Without chrono = 57 months, with chrono 1H/D = 41 months 031213 1 IM - B 2 3 Crown Positions: 28 1. Normal position 2. Quick correction of date 3.
PAGE 111
Movement Caliber : 8171 / 201 SETTINGS Setting the Date Setting the Time Caution: Never correct date between 9pm and 0:30am. 28 28 1.1 216 1.2 3 1 2.1 2.
PAGE 112
Movement Caliber : 8171 / 201 SETTINGS A Measuring Cumulative Times After 2 hours of continuous running, the chrono stop and resets automatically to save the battery. 28 3.3 A 28 28 218 3.4 3.
PAGE 113
Restart Movement Caliber : 8171 / 201 FUNCTIONS Measuring Split Times Start Split 28 B 4.3 A Stop Reset A 28 4.1 28 4.2 B 28 220 4.4 28 4.
PAGE 114
Movement Caliber : 8171 / 201 FUNCTIONS Enter After Battery Exchange or Mishandling Only To reset chronograph, minute and second chronograph 28 5.1 B 28 B 5.2 Seconds A Exit 28 28 222 5.3 5.
PAGE 115
Movement Caliber : 9230 / 0005 PRESENTATION Control Buttons Display Elements Movement Caliber 9230 / 0005 24 Hour Minute Hand Hour Hand Day 1 2 3 Second Hand 12 Hour Time Zone Date INFO Battery: 371-SR 920 SW Service Life Battery: 40 months 224 Push Button B 225
PAGE 116
Movement Caliber : 9230 / 0005 SETTINGS Setting the Day Setting the Time 1.1 226 1.2 2.1 2.
PAGE 117
Movement Caliber : 9230 / 0005 SETTINGS Quick Date Correction Caution : Never correct date between 9pm and 0:30am. 3.1 228 3.2 Setting the Second Time Zone and Day and Night 4.1 4.
PAGE 118
Movement Caliber : SW200 PRESENTATION Movement Caliber SW200 Display Elements Minute Hand Hour Hand Second Hand Day Date 1 2 3 Control Buttons Crown Positions: 1. Normal position 2. Setting the date 3.
PAGE 119
Movement Caliber : SW200 SETTINGS Setting the Time 1.1 Pull out the crown to the second position. 1.2 Turn the crown to set hour and minute hands. (Check that AM/PM is set correctly.) 1.1 1.3 Push the crown back in to the position 1. 232 1.2 1.
PAGE 120
Movement Caliber : SW200 SETTINGS Setting the Day 2.1 Pull out the crown to the position 2. 2.2 Turn the crown to right for day setting. 2.1 2.3 Push the crown back in to the position 1. Please note Do not set the calendar between 9:00P.M. and 4:00A.M. If the setting of the calendar is made during this period, the day will not change to the next day. Please set the calendar after changing the time other than the above period. 234 2.2 2.
PAGE 121
Movement Caliber : SW200 SETTINGS Setting the Date 3.1 Pull out the crown to the position 2. 3.2 Turn the crown to left for date setting. 3.1 3.3 Push the crown back in to the position 1. Please note Do not set the calendar between 9:00P.M. and 4:00A.M. If the setting of the calendar is made during this period, the date will not change to the next date. Please set the calendar after changing the time other than the above period. 236 3.2 3.
PAGE 122
Movement Caliber : SW200 SETTINGS To Start the Watch 4.1 Swing the watch side to side for 30 or more seconds.
PAGE 123
Movement Caliber : 638 / 101 PRESENTATION Movement Caliber 638 / 101 Display Elements Minute Hand Hour Hand Second Hand 1 2 Control Buttons Crown Positions: 1. Normal position 2.
PAGE 124
Movement Caliber : 638 / 101 SETTINGS Setting the Time 1.1 To set the time, gently pull out the crown to the first click stop positionand rotate to the time of day. 1.2 After setting the time, push the crown back to its normal operating position. The watch will begin running again. 1.1 242 1.
PAGE 125