User Manual

P6653

Filter Set

90352E

Filter Cartridge

CAUTION: YOU MUST ENSURE THE PUMP IS UNPLUGGED BEFORE

BEGINNING SPA MAINTENANCE TO AVOID RISK OF INJURY OR DEATH.

Filter Cartridge Maintenance

NOTE: To ensure your spa water stays clean, check and clean your filter cartridges

every day follow the steps below.

NOTE: We recommend changing your filter cartridges every week or, if the filter

cartridges remain soiled and discolored, they should be replaced.

Water Maintenance

Keeping your spa water clean and chemically balanced is necessary. Simply cleaning

the filter cartridge is not enough for proper maintenance, we recommend you use

pool chemicals to maintain water chemistry and chlorine or bromine tablets (do not

use granules) with the chemical floater.

NOTE: We recommend you take a shower before using your SaluSpa, as

cosmetic products, lotions, and other residues on the skin can quickly degrade

water quality.

To use the chemical floater, please follow the below instruction.

S-S-005596

Maintenance

NOTE: Your spa will require additional air to be added from time to time. Changes in

temperature from day to night will change the pressure in the spa and may cause a

certain amount of deflation. Please follow the Assembly instructions and drain the

spa before inflating to the accurate pressure needed.

NOTE: Remove the chemical floater from spa when the spa is in use.

IMPORTANT: After performing chemical maintenance and before using the spa, use

a test kit (not included) to test the water chemistry. We recommend maintaining your

water as below table.

7.4-7.6

Total Alkalinity

80-120ppm

Free Chlorine

2-4ppm

Using chemical liquid (not included):

Using chemical tablets (not included):