Installation Guide

• Safety circuit protection.
• Thermal protection.
• Terminal Block.
• Panel or wall mounting option.
Controller Dimensions
Depth 45mm (1.77in) width 180mm (7 in) length 104mm (4.1 in)
Distance between holes for mounting 164mm (6.5 in)
Net weight is approximately 350g
Installation
The charge controller is designed to be mounted flush with the wall.Flush mounting requires a
rectangular cutout in the mounting surface with sufficient space, 2 to 3 inch depth behind, to
accommodate the controller and wiring. The charge controller may also be mounted to the wall
without making a cutout. This is the quickest and easiest mounting procedure, however, the
controller will be raised from the wall.
CONNECTION DIAGRAM