Instructions / Assembly

WARNING

Never Attempt to start this Dirt Bike without reading and

understanding the Owner’s/Operator’s manual. The Owner’s/

Operator’s manual provides information on safety, parts,

functions, pre-ride inspection, starting and maintenance.

For questions about these assembly Instructions, call Coleman

Powersports toll free 888-405-8725

ASSEMBLY/INSTRUCTIONS

Tools needed for assembly

Phillips

Screwdriver

8mm,10mm

Wrench

8mm,10mm

Ratchet

032615

Model: 70DB

PAGE 1
ASSEMBLY/INSTRUCTIONS Model: 70DB For questions about these assembly Instructions, call Coleman Powersports toll free 888-405-8725 ! WARNING Never Attempt to start this Dirt Bike without reading and understanding the Owner’s/Operator’s manual. The Owner’s/ Operator’s manual provides information on safety, parts, functions, pre-ride inspection, starting and maintenance.
PAGE 2
Removal From Crate NOTE: SOME HARDWARE MY ALREADY BE AT ITS ASSEMBLY LOCATION ON THE DIRT BIKE Removed from crate Hardware Carton ITEMS IN HARDWARE CARTON Tool Kit Owner's Manual Handlebar Pad Top Clamps M6 x35 Bolts Handlebar assembly Hardware Shift Lever
PAGE 3
Handlebar Assembly STEP 1 NO. 1 2 3 4 5 NAME HEX HEAD BOLT TOP CLAMPS HANDLE BAR BOTTOM CLAMPS UPPER TRIPLE BRACKET QTY 4 2 1 2 1 SPEC. M6X35 Torque M8 x 20bolts - 20ft.lbs Shift Lever Installation STEP 6 NO. 1 2 NAME NUT GEAR LEVER QTY 1 1 SPEC. M6X20 NOTICE: THESE ARE ASSEMBLY INSTRUCTIONS ONLY. BEFORE STARTING THE DIRT BIKE FOR THE FIRST TIME , REFER TO THE OWNERS MANUAL FOR PRE-RIDE INSPECTION PROCEDURES. INCLUDING, OIL TYPE AND QUANTITY, TIRE PRESSURES, FUEL TYPE, ETC.
PAGE 4
Handlebar Pad Installation