Owner's manual

ManualsBrandsColeman ManualsSports and recreationAMERICAN HERITAGE ® WEATHERMASTER CABIN

AMERICAN HERITAGE

WEATHERMASTER

CABIN 12'X9'

Layout & Positioning of Tent

– Layout and position tent with door

facing desired direction. (illus. 1)

– Stake down tent, starting with

the corners. Do not stretch

too tight. Angle the stakes

slightly toward the tent.

(illus. 2) Keep the floor taught.

– Unzip the door.

Assemble & Place Roof Poles

– Assemble all shock-corded

roof poles. When assembled will

form a continuous arch with both

ends pointing down. (illus. 3)

– Insert the curved ridge roof pole

through center roof pole sleeve.

(illus. 4)

– Insert the curved End roof poles

through end roof pole sleeves.

(illus. 4)

When You Are Ready

To Set Up Your Tent

– Select a level campsite clear

of rocks, branches and other

hard or sharp objects.

– Do not set up your tent

under trees.

– For best results in windy

conditions, position the end

of tent into the wind.

(1) Curved Ridge Roof Poles

(Red Sticker)

Part No. 9232-1321

(2) Curved End Roof Poles

(Green Sticker)

Part No. 9232-1331

(2) Center Adjustable Poles

(Red Sticker) Part No. 9232-1301

(4) End Adjustable Poles

(Green Sticker) Part No. 9232-1311

Rainfly Part No. 9232-1341

Instructions apply to Part Number 9232D129

illus. 3 Curved roof pole assembly.

illus. 4 Curved roof pole system shown

inserted through pole sleeves. (3 total)

illus. 2

Stake loops

properly staked

Front door

Roof sleeve

illus. 1

Pole sleeves

Shock-corded poles

Forms an arch

POLE ASSEMBLY PARTS

Hinged Door Pole

Part No. 9232-1361

Vertical Hinged Door Pole

Part No. 9232-1351

Summary of content (2 pages)

PAGE 1
® AMERICAN HERITAGE WEATHERMASTER CABIN 12'X9' ® Instructions apply to Part Number 9232D129 When You Are Ready To Set Up Your Tent – Select a level campsite clear of rocks, branches and other hard or sharp objects. – Do not set up your tent under trees. – For best results in windy conditions, position the end of tent into the wind. POLE ASSEMBLY PARTS (2) Center Adjustable Poles (Red Sticker) Part No. 9232-1301 (4) End Adjustable Poles (Green Sticker) Part No.
PAGE 2
3 Raise Center of Tent Brace pole – Assemble center adjustable poles (red sticker, longer poles). Pole should be initially adjusted to the inner most hole “A”. (illus. 7) – Insert square end of brace poles into curved roof poles and raise tent upright. (illus. 5, 6, 7) – Adjustable poles should attach to squeeze pins at bottom of tent. (illus 8) – Repeat for other center adjustable pole. illus.