OPERATOR’S MANUAL 3.5HP/15-GALLON 15GAL AIR COMPRESSOR Cat.02315 34 IMPORTANT: READ OPERATOR’S MANUAL BEFORE USING Manufactured in China Toll Free Helpline: 1-855-900-2653 ©2010 Alton Industry Ltd. Group – All Rights Reserved R Coleman○ and are registered trademarks of The Coleman Company, Inc. used under license. ©2010 The Coleman Company, Inc.
TABLE OF CONTENTS SAFETY GUIDELINES----------------------------------------------------------------------------------------------3 BASIC COMPRESSOR FEATURES---------------------------------------------------------------------------4 ELECTRIC MOTOR-----------------------------------------------------------------------------------------------------5 AIR COMPRESSOR PUMP-------------------------------------------------------------------------------------------5 PRESSURE SWITCH ----------------------------------
SAFETY GUIDELINES This manual contains information that relates to PROTECTING YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS and is very important for you to know and understand. We use the symbols below to help you recognize this information. DANGER - POTENTIAL HAZARD THAT WILL RESULT IN SERIOUS INJURY OR LOSS OF LIFE WARNING - POTENTIAL HAZARD THAT COULD RESULT IN SERIOUS INJURY OR LOSS OF LIFE CAUTION - POTENTIAL HAZARD THAT MAY RESULT IN MODERATE INJURY OR DAMAGE TO EQUIPMENT WARNING 1.
BASIC COMPRESSOR FEATURES B A C K E F G D H J I A--------ELECTRIC MOTOR B--------AIR COMPRESSOR PUMP C--------PRESSURE SWITCH D--------PRESSURE RELIEF VALVE E--------AIR PRESSURE REGULATOR F--------TANK PRESSURE GAUGE G--------REGULATED PRESSURE GAUGE H--------AIR LINE OUTLET I---------AIR TANK DRAIN VALVE(invisible) J---------AIR TANK K--------POWER CORD - 4-
BASIC COMPRESSOR FEATURES A. ELECTRIC MOTOR: The motor is used to power the pump. It contains a thermal overload protector and an automatic reset. If the motor overheats for any reason, the thermal overload protector will shut it down to prevent the motor from being damaged. The motor will automatically restart when it completely cools. B. AIR COMPRESSOR PUMP: The pump is used to compress the air and discharge it into the tank via the piston moving up and down in the cylinder. C.
ASSEMBLY 1. Unpack the air compressor and inspect the unit for damage and parts. If the unit has been damaged or some parts are missing, contact the Service Center immediately. 2. Check the serial tag label to ensure that it has the required pressure rating for its intended use. 3. Unpack the smaller plastic bag with the air filter included and have the air filter (A) assembled on the pump. (See Figure 2) 4. Locate the compressor according to the following guidelines: a.
OPERATION PRIMING THE PUMP NOTE: The pump is shipped WITHOUT oil. Before starting, pour in oil provided in the pump through the oil nozzle. The break-in oil should be changed after 8 hours of operation. To reduce maintenance and repair problems, use only premium compressor oil. SAE 10W-30 all weather air compressor oil is recommended for general use. 1. Check the oil level in the pump through the oil sight glass. The pump oil level must be between A1 and A2. Do not overfill or underfill. (See A) 2.
MAINTANCE CHART WARNING To avoid personal injury, always shut off and unplug the unit and relieve all air pressure from the system before performing any service on the air compressor. Regular maintenance will ensure trouble free operation. The items listed in the chart should be inspected on a regular basis. ITEM Drain the tank DESCRIPTION To prevent corrosion inside the tank, the condensation must be drained at the end of every workday. Be sure to wear protective goggles.
TROUBLESHOOTING CHART NOTE: Troubleshooting problems may have similar causes and solutions.
EXPLODED VIEW EXPLODED VIEW PARTS LIST ITEM QTY DESCRIPTION 16------------2------------Screw 17------------4----------- Bolt 18------------4------------Washer 19------------4------------Spring washer 20------------4------------Nut 21------------1------------Plastic Anchor 22------------1------------Tube Transfer 23------------1------------Check Valve 24------------1------------Tube, bleeder 25------------1------------Handle grip 26------------2------------Pressure gauge 27------------1------------Regulato
R Saw Manufacturers, Inc GreatNeck○ 1 year Limited Warranty This warranty covers any defects in materials or workmanship of the enclosed product. GreatNeck Inc. will repair or replace any defective materials due to craftsmanship of the product. This warranty does not cover any problem caused by misuse, abuse, accidents or acts of God, such as floods or hurricanes. Consequential and incidental damages are not covered under this warranty. Coverage terminates if you sell or otherwise transfer the ownership.