Owner`s manual
18 www.durasportspas.com
Operate Your Spa
Personalized Settings
Jets
Most jets in your spa are fixed. If
your spa is equipped with any ad-
justable jets, rotating the face of
an adjustable jet to the left
(counter-clockwise) will increase
the amount of water flow through the jet. Rotating
the face of an adjustable jet to the right (clockwise)
will decrease the amount of water flow through jet.
Air Controls (if equipped)
Air controls are the 2” knobs
located around the top of your
spa. Each one will let you add a
mixture of air with the jet pres-
sure. This is accomplished by ro-
tating the air control knob to the left
(counterclockwise) to increase the amount of air-
flow through the jets. To decrease the amount of air-
flow through the jets, rotate the handle to the right
(clockwise).
Waterfall Controls
(if equipped)
Some spas include waterfalls. In-
crease or decrease the flow of
the waterfall using the 2” water
on/off knob near the waterfall.
_________________________________________
Lighting
Underwater LED Light,
LED Waterfall Lights (if equipped)
Press the Light button on the
topside control panel to turn the
spa light on. The lights operate in
4 modes:
%(-2+ The first time you press the Light but-
ton, the lights will cycle through all the colors in this
order:
White, Cyan, Magenta, Blue, Yellow/Green, Green,
Red
30363'/)(This cycle offers a hard color
change without fading.
9-'/3036,%2+)To cycle through the dif-
ferent color choices, press the Light button repeat-
edly. Each time you press the button, you advance to
the next color.
0%7,-2+;,-8) When you have cycled through
all the colors, the next time you push the Light
button, the LED lights will flash white.
_________________________________________
Operational/Energy
Tips
1. Control Valves – air and water con-
trols on the top of spa
a.Average to Cold Climate - When not in the
spa, make sure the valves are turned off. All these
valves will inject a certain amount of air into the
water which causes a cooling effect. Therefore
your spa will have to heat more often and cost
more money to operate.
b.Hot Climate – Hot tubs are only designed to
heat up and maintain temperature, therefore hot
climate can actually make a spa over heat. In
these areas, the control valves can be left open all
the time to help cool the spa down.
2. Filter Settings – Time and Duration
a.Filter settings – review your owner’s manual for
specific details
i. Filter times - if your spa has a clock to set,
then you set the filter time by the hour and
need to change in your programming menu. If
no clock then you simply set your filter time by
when the spa is turned on. If you power the spa
up at 8:00am, then it will filter at 8:00am and
8:00pm daily until the power is turned off and
on again.